-
Cheap RGB Laser Show ILDA
Hi,
I'm new in the forum and i want to enter in the Laser Projector World.
I want to buy one RGB Show with Ilda. After doing a light research i found Laserworld and they have some good prices.
But when i did a more deep research, i found that Laserworld have poor quality and power.
So, i want to know where i find some good cheap Rgb projector with ilda control and full color for less than $700,00 dolars. Do not need to be very powerfull.
I think 1W will do.
Thanks in Advance,
Felipe.
-
Hi and welcome to this forum.
Where do you want to use the projector? Only for own use ore do you want to do (commercial) shows with it?
And another question: How do you want to control it?
Cheers
-
I want to my own use, in some parties.
I don't know much about this controllers. I know that you can control by computer to do your animations.
And i'm from Brazil.
Thanks man.
-
If you want to control it by computer you will pay for a decent controller $500,- or more. You where saying that your gonna use it for your own use you could control it by DMX. That's the cheapest way. (Place the projector right to avoid eye damage!!!) But I don't think your gonna to buy a 1W RGB projector for your budget. What my first and very decent projector was, was a G-tech (www.coollaser.biz). Maybe you could contact them and ask them if there is a dealer near you.
-
I've gotten good service from http://shop.spacelas.com/ before and I believe their projectors are of good quality too. You might have to up your budget to $800-00 or more though for a analogue projector. They also sell Quickshow 2.0 for a $100-00 below retail. A good bargain.
-
-
You should go for analogue if possible. I went with TLL before I knew the difference and I can kick myself for not investigating properly first. In short TLL can only turn on or off. So with 3 diodes you can get 7 colors by mixing those 3 colors. Where with analogue you can not only turn them on and off, but you can set the brightness of each diode too, giving you practically millions of colors. Being able to set the brightness of the diodes have other safety advantages too that will help you if you want to do shows for audiences.
-
I will definitely pick one with analogue. Spacelas is good? better than LaserWorld?
I'm inclined to buy from them
Do you know any other place who sells cheap projectors ?
These Chinese on Ebay are not reliable and i think the powers you get is not the advertised.
Maybe i want one difficult mixture, cheap and good at this price range.
-
You can also contact http://www.eightonlight.cn/en/index.asp for prices. They also a Chinese company, and a few guys from here buy from them. Don't just trust any Chinese company. The majority don't make good quality lasers. Well, not good enough for what we want to use them for.
Peaces
Steve
-
I will not buy an analogue projector, at least, not for now.
The prices of them, plus $200 for shipping became a bit expensive.
So, is preferrable to buy from SpaceLas or LightSpace?
Thanks men.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules