Heya Sire -
Really, you've got all the 'building-blocks' you need - high-speed galvos, w/ as-small-as mirrors as your beam will fit-onto, and, as 'HQ',
(beam-specs-wise) and as hi-speed-modulatable lasers as you can afford, ie: direct-diode is preferable to DPSS, and vertical-cavity DPSS, is preferable to linear... reason-being, the better mod-linearity with v-cel, for-better 'shading' / blending, and color-subtleties, ie: when doing abstracts / rasters...
Of course, OPSLs and, next, PCAOMs will trump v-cels, for speed - just look at the 'liquidity' of the color mods in this shot...
https://fbcdn-sphotos-a.akamaihd.net...44211609_n.jpg 
..but superior PCAOM-results can really only appreciated by *cough, cough*
Ion owners *cough, cough*
But, even if you can't afford
super hi-speed galvos or v-cel DPSS, etc, prolly the most-important aspect for a graphics-projector - imho - is
access to convergence-adjustments so you can *keep* your nice mixed-colors, spot-on - If you've got a 'sealed-box', external-access to those MM-1s is a *must* for ease of use, on-site...I don't care *what* ∆r¢tøs-salespeople say

mounts
do drift, with internal and external temp-influences, and you'll
thank yourself, later, if your design has externally-tweekable combiner mounts - ie: the wonderful, wonderful 'vertical-drive' Thorlabs or Newport puppies, ie:
http://www.newport.com/HVM-Series-Ve...1033/info.aspx -
http://www.thorlabs.us/NewGroupPage9...ctGroup_ID=227 - personally, I prefer the Thorlabs, cause you can more-easily create a 'slot' in the adjustment knob, for tweekage with a pot-adjuster or small flat-head...
...Göod, for now?
Oh, pretty small...
DSLS_GX2_front.jpgDSLS_GX2_rear.jpg ...this is an 'in-studio-only' programming / demo rig... does not go on the road...

But, Sir Evil has got that one beat by a factor of WOW...
http://www.photonlexicon.com/forums/...926#post191926 - ..like 5" x 7" or something
insane... no, wait... 'sick'
Anyhoo, you can make these pretty-kompact...
ciao..
j