Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: 20 Diode Modules Revisited

  1. #1
    Join Date
    Feb 2011
    Location
    New Hampshire
    Posts
    3,513

    Default 20 Diode Modules Revisited

    It has been about 6 months since I have posted any pics re the large breadboard based "projector" I have been working on. Because the modifications are pretty extensive I thought it made more sense to post the link to this video as a new thread. Hope that doesn't offend anyone. After having reviewed the video I now understand the difficulty with filming lasers/projections with standard personal video cameras. The projections are not nearly as flickery and the lines are much finer in real life. I think the brightness contrast is causing them to appear bloated as the combined overlayed divergence is approximately 1.0 mrad. There is also a lot left out of the explanations that I can now see would have been interesting to include, but rather than redo it, I think it would be better to address these issues with additional posts. So here we go....


  2. #2
    Join Date
    Oct 2010
    Location
    Athens, Greece
    Posts
    1,930

    Default

    thanks so much for this video. i guess this is as close as i will ever get to seeing this thing up close, so i really appreciate it.

    thanks again!!!

    ps. last time, the images haunted me for weeks. let's see what happens now
    "its called character briggs..."

  3. #3
    Join Date
    Feb 2008
    Location
    Northern Indiana
    Posts
    921

    Default

    Holy crap! Holy crap!

  4. #4
    Join Date
    Feb 2005
    Location
    Switzerland
    Posts
    1,411

    Default

    Man that's an insane setup you made there. Incredibly good work!! Now you need to add a transparent anti-dust cover on top of that
    Btw greatly explained, thanks for the video

  5. #5
    Join Date
    Jun 2009
    Location
    The Woods, CA, USA
    Posts
    535

    Default

    Best video I've seen on the site yet, I love seeing naked hardware!

  6. #6
    Join Date
    Oct 2010
    Location
    Athens, Greece
    Posts
    1,930

    Default

    and don't forget the original post from a while back.... it sure did make some heads spin

    http://www.photonlexicon.com/forums/...-Diode-Modules
    "its called character briggs..."

  7. #7
    Join Date
    Jun 2007
    Location
    Monroe, Mi USA
    Posts
    818

    Default

    Holy Mother Of God !!!! What a Wet Dream HAHAHA !!! ( Water cooled ) Makes me head SPIN !!! Completely inspiring !!! Boy....I bet ALL the LSP Brass makes Dave's Didgeridoo go Wooo Wooo !!!! Will you adopt me ???

    BEAM
    Beam Axiom #1 ~The Quantum well is DEEP ! Photons for ALL !!
    .
    Beam Axiom #2 ~Yes...As a matter of fact...I DO wear tinfoil on my head !!
    .
    Beam Axiom #3 ~Whe'n dout...Po ah Donk awn et !!
    .
    Beam Axiom #4 ~A Chicken in every Pot, and a Laser Lumia in every Livingroom !!
    .
    Beam Axiom #5 ~"Abstract Photonic Expressionism"....is "Abstractonimical" !!
    .
    Beam Axiom #6 ~ "A Posse ad Essea" ~ From being possible to being actual ...is the beam target !

  8. #8
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    3,733

    Default

    Oh Planters... What an awesome video, thanks so much.

    9W of Red?
    This space for rent.

  9. #9
    Join Date
    Apr 2006
    Location
    Miami, FL
    Posts
    3,590

    Default

    sick dude... totally sick... impractically large but no less awesome

  10. #10
    Join Date
    Feb 2011
    Location
    New Hampshire
    Posts
    3,513

    Default

    As I promised, here are some additional pics that might be interesting.
    1203111918.jpg


    1203111919.jpg



    1203111917.jpg

    The small jig was used to glue the mirrors to the flex mount and although it took about an hour to fabricate,it was worth it. The glue ups were then simple to do. The mirror positions and more importantly their angles, were perfect.
    The one part silicone adhesive in the pic is the best all around I have worked with. It cures in about one hour. Because of its acid content it self primes aluminum and when you want it off just pry the components apart with a razor blade and scrape the residue off the back with the same blade and your ready to go.
    The E-xacto knife with the spade blade was modified into an extra wide thin driver for the O-like lenses by simply scraping the cutting edge off with a couple passes over some sand paper. Works well.
    Finally, the small burn spot on the window frame was caused when I did the final co-alignment of the two red modules with the PBS. Whenever I align "powerful" beams like 532 and 445 I always use a target, but it was "just" some reds at 50%. But, when I saw some smoke starting to rise above the window I thought what the... So I naturally put my hand up to protect the woodwork and immediately had to start waving my hand back and forth to minimize the pain while I fumbled around below the table for the modulation PSU. Just some late night adventures in laser land.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •