Wanted: 'Aixiz' 50mW Greenie, Model AIX-532-50AC (..I think..)

[dsli_jon]

After a new or gently-used one of these lil' puppies http://www.aixiz.com/store/product_i...roducts_id/414 - to replace a sick-one we have in the shop... Well, actually, it's to replace a perfectly-werking one we had that just got sacrificed to repair a 'Blisslight', but, wanna replace the one we used, to have as a small 'greenie'.. (..ya know, sometimes you don't *want* 3-4 Watts of green..

...I say 'I think', that's the Model#, as I can't read the 'Chingrish' on the label of the old, dead-one.. Open to ones that are used, but still have decent power, and life-left on the IR-pump.. Also, a 'head-only' is-fine, we have a couple of those driver-boards..

Not-open to heads that have 50,000 hours on them / coated in cat-hair / dust-bunnies / making two-beams, , etc, etc, nor offers of 'hey, I gotz a 500mW 'labbie' for real-cheeeep fer ya!!!!!' Remember, this must fit in a Blisslight, so, really after this model, only, xanque...

Open to trades, or cash/trades / semi-precious stones / lumia-wheel collections or other-such 'alternativity'...
Much-obliged..

j

[polishedball]

(..ya know, sometimes you don't *want* 3-4 Watts of green..

j

Still waiting to experience this...

[Solonar]

They are good little units, though I wouldn't trust the supplied driver. I converted both of mine to Flexmod drivers and 1 has worked great for 2 years so far.

1 does 50mW and the other did 75mW(until I killed it accidentally(don't touch the frequency pot on a flexmod under power)).

[swamidog]

frequency pot?

(some chars)

They are good little units, though I wouldn't trust the supplied driver. I converted both of mine to Flexmod drivers and 1 has worked great for 2 years so far.

1 does 50mW and the other did 75mW(until I killed it accidentally(don't touch the frequency pot on a flexmod under power)).

[polishedball]

the pot they are tuned with that Andrew sets up and says do not touch.

frequency pot?

(some chars)

[swamidog]

oh. the magical middle pot. got it.

the pot they are tuned with that Andrew sets up and says do not touch.

[Solonar]

This was on an older N2 version, I wasn't actually adjusting it, I just touched it with a probe and poof, dead diode. Lesson learned.

They have a bit of balloning under modulation, but without a TEC its to be expected I guess.

[sugeek]

John,

I just sent you a PM... Get a hold of Hak or Aixiz directly...

-Adam