Winni@ goldenstarlighting.com

**KGB** · 02-28-2012, 11:46

Originally Posted by dash8brj

In otherwords, change the mirrors, dremel the block and be damn good at tuning. I'd guess just stick to buying the wides :P

Not at all...they are very different and have different electrical components.. You cant just make then scan wide by cutting out the mounting block and re tuning......if it was that easy everyone would be doing it ..

**dash8brj** · 02-28-2012, 11:58

KGB - I should have put sarcasm tags around my post - the :P didnt give it away obviously.

My case looks to be sitting at honkers airport waiting to get on a plane

**Jenus** · 03-01-2012, 01:59

Ok so I'm now in contact with Winni and she just let me know that they will not sell any cases this year

So does anybody know where I can buy cases?

**dnar** · 03-01-2012, 02:19

Originally Posted by KGB

They do have the wides....not sure why they aren't on that price list, but the quote I got was $473... they are definitely not cheap copies of the DT design....they are original DT's...

Har, the DT's are a cheap copy of another design!

Originally Posted by Jenus

Ok so I'm now in contact with Winni and she just let me know that they will not sell any cases this year

So does anybody know where I can buy cases?

Several options.

1. Contact MrWilling and see if he will do another run of the Edison case (or has any left over).
2. Contact Rob (StanWax) and see if he has anything laying around - his "littlestan" case was available last year.
3. Buy a Goldenstar projector from Winni and scrap the electronics.

**norty303** · 03-01-2012, 03:13

Ok so I'm now in contact with Winni and she just let me know that they will not sell any cases this year

Looks like some of us got in just in time.

I would second Dnar and say, buy the cheapest spec projector (probably with the scanners you want, if you haven't already got them) and sell off the remains. You may even make some money on the modules and you'll have a load of spare odds and sods to play with.

BTW, was just looking at db3306's pics again and noticed the lack of filters on the fans. If they are both blowing, get filters for them. If they are sucking, make sure you add filter material over the cutouts in the side plates.

I have both mine blowing, and I've masked over most of the side plate exit holes to force positive pressure and most of all, faster air movement. This means that any particulate is more likely to be carried through the projector rather than being able to settle.

**dash8brj** · 03-02-2012, 22:05

oh that sad - I must have been one of the last to get one of these Case H's - theyre a pretty good case for what you pay. I've just finished mounting up all the rear panel hardware, and arranging my stuff in side to see how I'm going to fit it all. Looks like I'll have a tight squeeze with my scanner amps heatsinks!

I wonder why they arent selling them anymore?

I plan to have my fans suck air through the sides of the projector through filter material. Once I put one of Winni's AR coated windows over the exit aperture, the only path for the air is through the side holes and out the back.

**dnar** · 03-02-2012, 22:12

Originally Posted by dash8brj

oh that sad - I must have been one of the last to get one of these Case H's - theyre a pretty good case for what you pay. I've just finished mounting up all the rear panel hardware, and arranging my stuff in side to see how I'm going to fit it all. Looks like I'll have a tight squeeze with my scanner amps heatsinks!

I wonder why they arent selling them anymore?

My guess is that by the end of last year all they were selling was cases!!!!

Either that, or they need the cases to make projectors...

**Jenus** · 03-03-2012, 00:10

Winni told me they needed all the cases for projectors and that there was like a two months build-time on cases right now because of so high demand.

**dash8brj** · 03-03-2012, 00:12

This explains why mine took a week to ship - the demand for them inhouse has risen and I just happened to be one of the lucky last to get one.

**goldenstarwinni** · 03-16-2012, 00:21

hello every one .Thanks for your support once more .I am very appreciated for that and it is my pleasure to service of u .Now we are the new website for laser projector : www.goldenstarlaser.com . And now our company have 5 styles of laser case hot sale now,hope this is good news for every one ,and hope this is helpful for u. If any need or question ,please donot hesitate to contact and send me my email address : wenxiaoni716@163.com .Thanks again .
Hope every one have a great weekend !
Winni

Thread: Winni@ goldenstarlighting.com

Thread Tools

Posting Permissions