My Laser Display projector, PART 2

[liteglow]

Ok here is a update on my RGB scanner 8)

History:
It did all begin with LPT, popelscan and a modded leadlight doing 60-80mW and 8kpps galvos!

Part 1 of my project was DT-40 galvos and only a 240mW green dpss..
So as promised, here is the part 2 and finally part 3 (when I mount the green)

Today I have:

*Blue DPSS 200mW analog blanking
*Green DPSS 180mW analog blanking (in mail)
*RED DPSS 400mW analog blanking

RGB total white almost 700mW

*DT-40 PRO Galvos 40-55kpps
*Lumia wheel with 1rpm effects :lol:

And I have a custom made alubox where all the parts will be inside.
When it`s finnished, it will be covered with a custom made flight-case



Software:
Mamba black with USB EASYLASE



pictures:


Here is some parts ready to be used


Alot of testing and failing how to mount the dichros...


Blue laser mounted on a heat-sink !


This is my little helper ready to tell me how I can mount the stuff..


Blue laser, mirror mounts, and red lasers mounted on TOP of the box!


This is the first section on the box, where ALL power and drivers are mounted.


My little helper is checking out that the ground floor is OK to mount the power supplys...


Power supply is mounted with black umbracho skrews.. only the best is approved!!


The EASYLASE USB DAC mounted on the ground.


The DT-40 pro galvos is mounted on 3 adjustable rock solid screws!



Finally, after some days with drilling, cutting and mounting...
It`s almost complete and ready to test (no green yet mounted)



First test, and it`s all working like a dreeeeam
PERFECT alligment with the red and blue..


Colour test working fine (no green)


More images, i just love the colour :roll:


If you yet dont love the output of a laser scanner after this images, you are free to leave...


Ooooohh.....


Blue is coming behind into the red, and they going out as purple 8)

Check out the FULL-SIZE images on this link :

http://photonlexicon.com/gallery/RGBProjector

[JimBo]

Excellent, only the green left to do then.

Is that the wifes bank card supporting the galvos in IMG_7720.JPG?

Jim

[LASER-AD]

LOOKS SWEET!!

[liteglow]

Thanx for the reply

Haha no the VISA card is my own

There is no money on it at this moment... so I did use it the only way It can be used now :roll:

[sbk]

Very weeeeell, good work!!
I really want a blue laser in my projector, mixed with red the color is beautiful :twisted:

And the DT-40 galvos seems to be very very precise!

[jkaiser3000]

Great work, great images, great color, great..uhh.. everything

I really need to start working on my projector :roll:

Good work

[jian725]

Super system :P

[liteglow]

thanx 8) 8)

And thank YOU Jian for sending me the DT-40
This dream of making a projector at this cost would never happend if it not has been for Jian , and spec on this forum !! so the thanx go to them for all the support it`s really fun to have completed a RGB projector.. knowing that 2 years ago I didn not know what a galvo was :roll:
So thanx to spec that have online supported me with info :mrgreen:

[dave321]

looks great how do you find the mamba black software ? great pics

[liteglow]

I like Mamba Black
It`s really nice and easy to use !
But it`s not so many effects to make ..

But if you are creative you can have alot of fun with it