Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Well that didnt last long.

  1. #1
    Join Date
    Dec 2011
    Location
    So. California
    Posts
    21

    Default Well that didnt last long.

    I got my X-Laser Mobile Beat RGB on Friday. After reading the instruction book and safety DVD I Plugged it in to watch the demos that it comes with. I noticed that the green laser was not as bright as the other two and I could not even read the last two digits of the 2011,2012,2013 countdown that were in green. I read the instruction book again and it said to let it warm up for at least 15 minutes. Well after 20 it was the same. I took a video of it and emailed Dan at X laser so that he could take a look at it and let me know what he thought of it. He emailed me back saying that the green laser must have moved a little in its shipment to me. He told me to ship it back to him and they will send me a new one. So its going back tomorrow morning. I have not received quickshow yet in the mail so its no big deal. Even with the green laser misaligned the laser demo was pretty neat. I didnt think it would be so bright. I am glad I didn't go for a more powerful laser. 450mil is bright enough for me.

  2. #2
    Join Date
    Jun 2009
    Location
    The Woods, CA, USA
    Posts
    535

    Default

    X-Laser would not let you service it your self? Warranty concerns? I would think that checking the alinement would be something a new owner would want to learn how to do. In the youtube X-Laser videos he talks about easy service options, easy access optics section.

  3. #3
    Join Date
    Dec 2011
    Location
    So. California
    Posts
    21

    Default

    There were two security tapes on the case saying if they were broken the warranty would be void. I have never owned a laser before so it was better just to send it back.
    Maybe in the future I can learn how to align them myself. Before I received it I emailed Dan if it was possible to upgrade the scanners to something like twenty or thirty kpps.
    As this model has 15kpps scanners in it. As it seems most people on here say that 30 kpps is about the standard for smooth shows. He told me that this models case was pretty tight and that it would not be possible to upgrade the scanners. He said that 15 kpps scanners were tuned and should be fast enough to do the type of shows that I was planning. So when I get the new one back and quickshow I can start doing some shows.

  4. #4
    Join Date
    Jul 2007
    Location
    west sussex uk
    Posts
    2,280

    Default

    $20 says you would of wished you got the 30k
    Scanner after you plugged in quickshow.
    Wellcome to the world of lasers
    When God said “Let there be light” he surely must have meant perfectly coherent light.

  5. #5
    Join Date
    Dec 2011
    Location
    So. California
    Posts
    21

    Default

    I would like to get the 30k scanner but that would mean a completely different model x-laser. I think the next model up is the sky writer series. Last years model has 15k scanners in them but you can upgrade them. This years has 30k scanners but its way past my budget. I got the Mobile Beat MkIV RGB for the intro price of $995. they skywriter is around $2300. Way past my budget. I just wish that mine was upgradable.

  6. #6
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default

    Nonetheless... I still maintain you will never be sorry you went the route of getting into this "the right way" with an X-Laser product from Dan and your Quickshow.

  7. #7
    Join Date
    Aug 2008
    Location
    UK
    Posts
    5,704

    Default

    I think you'll regret not getting 30K if you want to do graphics.

    I have a Kvant with 25K scanners and reducing speed in the software from 30K to 25K has a noticeable result flicker wise. Same with 25K to 20K. In fact 20K was so bad on some demanding patterns I turned them back to 25K.

    30K to 15K is a big jump and if you want graphics I think you're going to be wholly disappointed.

    Don't want to take anything away from Dan but 15K is 15K.

  8. #8
    Join Date
    Jul 2008
    Location
    My momentum is too precisely determined :S
    Posts
    1,777

    Default

    You could just wait until warranty voids and replace them yourself with 30K scanners. It's not rocket science after all.

  9. #9
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,248

    Default

    I think the main issue might be that the 15k scanners use a single dual channel driver board which fits in the case ok. however, to go to 20 or 30k will require changing to a scan set with separate driver boards... and they don't fit.

    So rocket science it may not be, but some quantum science and 4th (or higher) dimensional theory may be required to adjust the available space inside the case to something that CAN accomodate them. And that'll probably need a bigger PSU...
    Frikkin Lasers
    http://www.frikkinlasers.co.uk

    You are using Bonetti's defense against me, ah?

    I thought it fitting, considering the rocky terrain.

  10. #10
    Join Date
    Dec 2011
    Location
    So. California
    Posts
    21

    Default

    Thanks everybody for your opinions and personal advice. I have decided to wait and save up and get their next higher projector with the 30k scanners. Dan was very nice when I first asked about a scanner upgrade and he explained to me that this models scanners could not be upgraded to to not enough room inside of the case and that I could return it in a month if it did not meet my needs. I would like to do that but I will not be able to save up the difference in one month for their Skywriter series projector. So instead of using the Mobile Beat for a month and returning it to them (used) I think its better to do it this way. I have been reading in this forum that this is a expensive hobby so I want to make sure that I do not have to upgrade later. The Quickshow software cost me $550 alone so I want to make sure that I can get a good percentage of what it has to offer. I know at first the shows I make will be simple but as I learn the software and like everybody else the shows will get more complex. So I think waiting to save up for their 30k scanner model is worth the wait. I can use the time while saving up for the projector to get used to working with Quickshow.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •