The first full color pluto laser

[RGB LASER VERKOOP]

2200 euro! on sale now 10-2-2012

This projectors come from china and the chinese can make it in only single color.
they not listen to me it can be full color.
so i build one to show them :-)

Hope now china can make it
it has
tec cooled 650nm red diode laser (3 diode;s in one mount) perfect small round beam red about 700mW
tec cooled bleu laser with prism pair so nice small round dot
and 1w cni green
Attachment 29545Attachment 29546Attachment 29547Attachment 29548

[Steve Milani]

Nice! Very interesting!
Please tell us more about 3 reds diodes in one mount...
1) about how you got "a round beam" (picture is little confused... too many scanner wires are over red setup...)
2) Total price of 3 reds (if this is not a secret detail...)
3) Factory which come from these 3 reds.

Anyway you done a very good job! Well done!
Greetings
Steve

[Picasso]

WOW now that is one tiny RGB! What did you have to fit in the lower section? I was looking to move my scan amps to the lower section of the case, mount them to the under side of the main optic plate. But I will have to think about that more, I like your placement. I hope Omar does an RGB unit in this case. From what I can tell OMAR@ Lightspace is not a reseller but a true mfg, but seems main work is scanners.

[norty303]

Steve, I think the 3 diode modules are the ones done by Mccarrot

[RGB LASER VERKOOP]

The below section is full !
Becourse the big power suply and driver for the CNI laser (1,4W green)
All is full hi hi
Hope china can do this, then they have a perfect small system and looks good!

the 3 diode mounts are from From: [maurice]
the diode's are from o-like
the druiver i use is 1 quad driver from: Thomas Rasmussen.
The TEC i buy from: http://www.tecoolers.nl/

and a demo you can see at www.laserverkoop.nl

laser greets, and merrie christmass

joost

[sbk]

These Pluto are looking good indeed. Even more with some colors into it... But you should maybe make a more proper wiring

Hope china can do this, then they have a perfect small system and looks good!

But why on earth do you want so much China can do this? Isn't the biggest part of laser fun justly into building them or modifying by yourself? Do you really want to let this fun made by Chinese workers which really don't care about having fun building lasers?

[RGB LASER VERKOOP]

yes, it is a first quick test ;-)

i try new one with more power 635nm mitsub. diode's
bigger beam but nice for beamshows

laser greets joost

[mccarrot]

Joost, can you remove my emial from this forum, posting bare email addresses will cause allot of spam in my mailbox as there are bots scanning forums for email adresses.


Here is a better close up of the red:

Tripple blocks are on stock for 69 euro.

[RGB LASER VERKOOP]

done my friend !
love your diode mounts!

[Picasso]

I opened up my pluto tonight to move my scan amps to the same location as yours Joost, I will have to extend my pwr wires to make it. Omar if you reading this, The location that Joost has used is the best location to place the scan amps for all builds of the Pluto. Also Omar you have done a great build with the Pluto. I have noticed that you have filed/sanded the sharp edges, You also have placed tape in locations that might rub. Again GREAT attention to detail in Omars builds.