Hi all, after a break and some thought, I've decided to return, hoping that the drama around here has settled... I've also returned because, with a new office/shop, I wanted to see if there's much interest in the return of the ILDA breakout board. I plan on reviving a couple old projects and have some new ideas, but for now I want to start with this. I have completely redesigned the breakout board to make it a bit easier to use, instead of the ILDA IN DB-25 being attached directly to the board, it will now attach via ribbon cable. This will allow the DB-25 to be mounted on the outside of a projector case, feeding the ribbon cable thru the cutout to the breakout board. The new version will breakout all color channels as well as "Z" for Pangolin users. There will also be a DPDT switch to easily invert the X signal.
So, any interest in this? The original breakout board was amazingly popular, I remember selling out of the original order of 32 in less than 24 hours. My plan would be to sell these for $15 shipped anywhere in the world, this would include an assembled DB-25 connector and ribbon cable for ILDA in, if you needed the passthru cable that would likely be another 2.50 - 3.50. With 10% of each board sold to support PL.
So let me know if this is something that would be worth persuing or if you have any recommended changes. Thanks!