Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: How to calculate MPE/divergence

  1. #1
    Join Date
    Feb 2012
    Posts
    4

    Default How to calculate MPE/divergence

    Hi

    Im pretty new to the laser projector community and was wondering how I go about calculating the MPE and divergence of my projector?
    I have a Reke 500RGB. Max output is ~500 mw.

    Also, what is a safe distance to audience scan with 30mw?

  2. #2
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,115

    Default

    Quote Originally Posted by chocpretz View Post
    Hi

    Im pretty new to the laser projector community and was wondering how I go about calculating the MPE and divergence of my projector?
    I have a Reke 500RGB. Max output is ~500 mw.

    Also, what is a safe distance to audience scan with 30mw?
    That is a wide open question. First of all, do you own a laser power meter? If not, you have no business even trying.

    Audience scanning is highly dependent on frame content and exposure duration.
    There is more to it then just the projector hardware.

    This will take some time and a quite a few posts to explain.

    30 mW CW in a static beam, or 30 mW scanning at what angle, what divergence, and for how long? At what frequency?

    Pulse duration matters.

    There is also cumulative exposure.


    Steve

  3. #3
    Join Date
    Feb 2012
    Posts
    4

    Default

    Can you recommend a cheap power meter?

    Also, I dont know how to go about measuring scanning angle and divergence to give you these numbers.

  4. #4
    Join Date
    Mar 2007
    Location
    Rotorua New Zealand
    Posts
    528

    Default

    As Steve mentioned there is a lot to cover here in what you asked.
    First you do indeed have business here despite what Steve has said. It's all part of learning.
    You are asking a question that has been asked a hundred times before.
    Could I suggest that first you doa search here on PL re this subject the info is here you may just have to dig a bit.
    Also I suggest a visit to www.pangolin.com have a look in their resource guides you will find several papers that Bill Benner has written on this and related subjects.
    Unfortunately there is no simple answer to your questions until you get a good basic understanding of how things work.
    The good news Is you are in the right place to get the help.
    So have a go and searching on PL you will find tons of info here.

    Re the power meter question there are quite a few perhaps you might like to lok at lasers show parts website or talk to Dave at that site.
    Also you could talk to Bridge at Laserwave web site.
    Anyway it's great you are asking the question as way too many do not ask and simply do not knowing what it is they are doing."..... I guess learning starts with the question.

    Good searching.

    Cheers
    Ray
    New Zealand

  5. #5
    Join Date
    Oct 2010
    Location
    Athens, Greece
    Posts
    1,930

    Default

    you can try this site, for an easy to use divergence calculator / beam size
    (of course there is the much more complicated and accurate sliding knife edge that steve has sugegsted some time ago)

    http://www.pseudonomen.com/lasers/ca...alculator.html

    sorry, i can't be much help about MPE
    "its called character briggs..."

  6. #6
    Join Date
    Jan 2007
    Location
    Yorkshire, UK
    Posts
    4,584

    Default

    Do you have an iPhone?

    If so, do a search on the App Store for two applications, 'Laser NOHD' and 'Laser Safety'. These are two simple applications that may help you to gain an understanding of a few of the terms related to calculating MPE's. They were designed and programmed by James Stewart of 'Laser Visuals Research' see here: www.lvrlimited.com for more information on Laser Visuals.

    I have no connection with LVR Ltd, but I do have the applications and I find them extremely useful. Ultimately, you will need to understand the math and what is going on behind the simple interface. However, they are a great place to start the learning process and become familiar with the terminology.

    Hope this helps

    Cheers

    Jem
    Quote: "There is a theory which states that if ever, for any reason, anyone discovers what exactly the Universe is for and why it is here it will instantly disappear and be replaced by something even more bizarre and inexplicable. There is another that states that this has already happened.”... Douglas Adams 1952 - 2001

  7. #7
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,248

    Default

    Look on the safety section of the ILDA website. There are some great papers there, including one about introducing a new 'simplified' method for calculating safe exposure.
    As someone new to this, this is perhaps what you should be aiming for, but you will need a power meter, and one that is accurate in the 0-20mW range (aperture size dependant)
    Frikkin Lasers
    http://www.frikkinlasers.co.uk

    You are using Bonetti's defense against me, ah?

    I thought it fitting, considering the rocky terrain.

  8. #8
    Join Date
    May 2007
    Location
    1 hr from everything in SoCal
    Posts
    2,833

    Default

    Welcome to PL

    What part of the world do you hail from? Aside from the safety parameters of what you are asking, there are legal things to consider as well depending on the laws regarding audiance scanning in your country. If we know where you are from, we can better help you.

    As far as a cheap power meter, you might want to check out Laserbee.
    If you're the smartest person in the room, then you're in the wrong room.

  9. #9
    Join Date
    Feb 2012
    Posts
    4

    Default

    I'm from the US. I'm aware that audience scanning is illegal here, but this is mainly for private parties/house parties.

    I have a Reke 500mw RGB, a shinp SL-1 (~30mw 532nm), and a bunch of cheap little laser star projectors.

  10. #10
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default

    Quote Originally Posted by chocpretz View Post
    I'm from the US. I'm aware that audience scanning is illegal here, but this is mainly for private parties/house parties.

    I have a Reke 500mw RGB, a shinp SL-1 (~30mw 532nm), and a bunch of cheap little laser star projectors.
    On the contrary, audience scanning in the United States is NOT illegal. As long as you have the technical expertise, the measuring equipment, and can demonstrate to the CHRH you KNOW what you are doing, they will grant you a variance to audience scan. It's just that very few people in this country meet that description. I believe your last name needs to end with a "v". Even people who deal with lasers professionally every day have said they're not yet comfortable with the requirements for audience scanning.

    (Your lasers however... ARE illegal, at least for any public shows where commerce is in any way involved. And, audience scanning at a private party with less than desirable equipment is really almost worse since your chance of equipment failure is even higher. Regardless, blind is blind.)
    Last edited by Bradfo69; 02-14-2012 at 18:52.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •