Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: Just bought a Skywriter RGY 300mw

  1. #1
    Join Date
    Feb 2011
    Location
    Leavenworth KS
    Posts
    81

    Default Just bought a Skywriter RGY 300mw

    Hey all,
    I found this:

    http://www.ebay.com/itm/260948457840...84.m1439.l2649

    I bought this laser! X-Laser Skywriter RGY 300mw
    I've also gotten in contact with X-Laser about getting it calibrated and transferring the ownership. I've been watching this forum for some time now. Nice to post something. Hope this was a good buy. I'm debating if Pangolin will look good with it. I'm so new to all this. 15k scanners work ok for scrolling text? As I understand it the slower scanners may have problems with texty stuff unless its scrolling. I hate to ask too many questions on here because the lingo is so far out there. So I'll just keep searching.

    FYI I used to own a 500mw Laserworld CS-RGBV. I think this X-Laser will be better and make me feel much better about the legality. X-Laser was $682 shipped. I think its a good deal.

    Thanks all. I think I did ok on this unit and the seller has been super cool.

  2. #2
    Join Date
    Feb 2011
    Location
    Leavenworth KS
    Posts
    81

    Default

    I'd love to build my own someday. You guys are fantastic. I think a sweet homemade blue laser with some fast galvos would be super fun. I'd love to but I'm a really busy teacher, dad, DJ and well....laundry sorter.

  3. #3
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default

    I watched this right up until about 8 minutes before the end of the auction and then, talked myself out of bidding. It's stayed $450 with no bids for a long time and I seriously had to wrestle with the idea as I had one very specific purpose for it. I was happy to see it went for more so I don't feel bad about my decision to not bid. Truth be told, it's below the level of the other lasers I'm personally working with but, it's legal and, I've always wanted to support X-Laser with a purchase of some sort.
    You should be pleased with this unit and also with X-Laser. Dan and company are good people. Yes, Pangolin with work with it, as will any other ILDA software.

  4. #4
    Join Date
    Feb 2011
    Location
    Leavenworth KS
    Posts
    81

    Default

    Very cool Brad. Yes only one other bidder jumped in. I used auctionsniper and was willing to go to $701 on it...the seller has a x-pod system too...not sure if I want that type of system but pretty cool too..

    What was your specific purpose?

  5. #5
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default

    I was going to use it for a dedicated gobo projector for the weddings we have here in the facility I manage. I wanted something small that I could pretty much leave in place all the time, with a laptop and FB3 and just flip it on, type the bride and grooms name/date into Quickshow and be done. An RGB would be nicer from a color standpoint for that but, an RG would still be fine. Since I have the paperwork for my show variance being processed now for a much bigger gas laser installation, the only thing I want to add should be varianced equipment and, this seemed like an inexpensive way to add the desired effect, rather than some $8000+ US varianced RGB projector. I have other projectors I could use but, nothing actually varianced. I either need to take the steps necessary to get them legal, get rid of them, or make them for basement use. And, I'm NOT turning on an 18 watt whitelight for a $250 gobo effect. Yes, a couple weddings would have paid for the Skywriter but, the 15k scanners are what turned me off since it would be almost exclusively text.

  6. #6
    Join Date
    Feb 2011
    Location
    Leavenworth KS
    Posts
    81

    Default

    Exactly why I bought it too! But I'm hoping to get some serial numbers to dan to see about faster scanners in there. WOW 18W whitelight! HOLY$&$^@##(*

    That's a BIG GOBO! Thanks for the info. Very cool. I'm on the right track. Not sure I want to get an FB3 yet but probably will...Pangolin looks really nice. But I don't know...

  7. #7
    Join Date
    Feb 2011
    Location
    Leavenworth KS
    Posts
    81

    Default

    Brad is what you are saying that 15K are too slow for static text....this is my understanding. From what I can tell text is OK if you scroll it.

  8. #8
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default

    Potentially. It depends on the text and the number of points in the image. I would normally scroll it too so, it COULD have been o.k. for my purposes. I checked out some videos on the unit and when I studied the output carefully, I imagined what it would look like with what I want to do and decided that I ultimately would probably be a little discouraged. Granted, clients may have been fine with it but, since I know better, I would probably always look at it and have questioned my decision to get it. I'm not saying that as a knock on the product, the company, or you as a buyer. That's just me. And, even X-Laser knows that their products fill a much needed niche market with the mobile DJ crowd and that many of us here are simply working with things that are more specialized or, many are DIY'ers that would rather build a laser than buy one. And, are gonna tweak and tune, tweak and tune, tweak and tune. (Something you really shouldn't do with theirs.)

    I have a big facility. I've found I need 3 watts in an RGB or better (for beams) to get a wow factor because of size, because of ambient lighting, because of atmosphere, etc. And, because of the layout, I need a couple of them. When it's pitch dark, my half watts are pretty decent but, the lights are never all off for a wedding or anything else, except when I'm playing. There's light from the lobby, the bar, the kitchen door windows, perhaps the DJ, etc. A quality 300mW for graphics on a wall such as your Skywriter puts out is fine. And, would even be fine here so, I wasn't worried about power, just the smoothness of text.

  9. #9
    Join Date
    Feb 2011
    Location
    Leavenworth KS
    Posts
    81

    Default

    Ahhh...see this part when you say "points in the image"...this is the laserist stuff I'm trying to get together in my so when I build a graphic/text I can make it look presentable. I definitely know this is a mobile DJ or less laser. I get that. This is my first run with a legit laser and its a nice toy for now. Most places I'm gonna have to be real careful with hazers anyway so I'm reserving this for when I can get a marshall there etc. But at least for the text standpoint I can either upgrade (hopefully) the galvos or just leave it as is and project onto walls. You have been most helpful man. Thanks for posting.

    On a side note...I got a chance to see what 5 - 80W lasers looked like at the Brad Paisley show...at least that is what the control operator said they were. They were frickin' beautiful. I don't even think they were at full power.

  10. #10
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default

    Points... a laser image is made up of a series of dots. Points where the laser/galvos stop and start. Persistance of vision is what allows those to become smooth looking lines. The more complex the image, the more points it contains. For the set speed of a galvo, the more points that are introduced into the image, the harder it is to be reproduced without flicker. The faster the galvos, the more capable they are at displaying complex images with lots of points such as text. Your laser contains scanners rated for 15,000 points per second. Faster scanners are available at 25,000, 30,000, 40,000 and even some claim to be able to handle 60,000 points per second. 15,000 will give you a number of acceptable images and some text but, the more complex the image or, certain fonts or stationary letters, will introduce more points and therfore more flicker. X-Laser claims they work really hard at tuning them to give the most optimal output possible. There are those here that can explain the math better than I can. But, it's not unlike the scan rate on your older TV set and the number of times the screen gets redrawn in order for you not to perceive flicker.

    In the newest 2012 Skywriter models, they've moved to 30k scanners and have also made the line RGB. It IS entirely possible that after you spend some time with it, if you still want to upgrade, they may be able to do that for you (the scanners anyway). Yes, you could probably technically do it yourself someday but, in order to maintain warranties and get the best out of it, I'd say let them keep you up and running.

    For graphics, you really don't need any haze or fog. It's not necessary so, you can use it in just about any venue. It's when you want to see the beams where you have to think about atmosphere and smoke alarms and things.

    I would be willing to bet that no, they probably weren't a full power but, 5 80watt lasers even at less than 100% must have been awesome!
    Last edited by Bradfo69; 02-14-2012 at 17:27. Reason: Rather scarey I'm starting to be able to explain this stuff!! LOL

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •