Results 1 to 7 of 7

Thread: Beginning the Build (Finally!)

  1. #1
    Join Date
    Jan 2011
    Location
    Santa Cruz, CA
    Posts
    309

    Default Beginning the Build (Finally!)

    So, I am finally starting to build my first projector. I have spent the past year collecting the components necessary to build a decent projector... but still missing a few.

    Whats going into it:
    445 driven by Dr. Lava's Flexmod (if I didn't already fry it) and corrected with anamorphic prisms (power will be dialed down to get a good white with other lasers)
    660 quad using Edison's kit and Badpip's driver
    300 mW 532 CNI module (at least until I can afford more)
    EMS-7000 Scanners
    j4cobo's Ether-Dream
    Shutter (from Picasso)
    Fans from DMR

    Still need to pick up:
    MM1 Mounts (4x)
    Dichros
    FS Mirrors (2x)
    Power Supply for Diodes

    All this will be put on an aluminum plate (Supplied by Picasso, THANKS!)

    photo.JPG

    So, almost everything fits... The cellphone is the place holder for the 532 module. I have to do something about the psu's and drivers.

    First on the list of things to do is build the 445 module. I am so glad there are so many good examples on this forum to learn from. I am using an old 473 module housing to keep the diode and driver in.

    photo (2).JPG

    I attempted to get this bad boy lasing at BayLEM, but might have cooked it... lol. Learning the hard way on this one. Still gotta test it to make sure. I got the anamorphic prisms and lens from Stanwax Laser.

    Anyway, I will be posting my progress as it happens... and questions that arise (there will probably be many). I want to say thanks to all the members on PL that have already helped me and those that will help in the future... this Forum is a great resource.

    CONTRIBUTE >>>http://www.photonlexicon.com/forums/payments.php <<< CONTRIBUTE (only if you want to )

    Thought I would throw that in there too

  2. #2
    Join Date
    Oct 2009
    Location
    Perth Western Australia
    Posts
    844

    Default

    Hi Sal,

    Great stuff mate! You've assembled a great combination of parts there. That's going to be a mint graphics projector!

    Keep those pics coming.

    Have fun
    Kit

  3. #3
    Join Date
    Jun 2009
    Location
    The Woods, CA, USA
    Posts
    535

    Default

    Grats on starting your build. I should have given you the Red/Green dichro as well, I guess next time I see you remind me.

  4. #4
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    3,733

    Default

    Nice. You have done the same as me, fitted your 445 build in an old B&K 473 module!

    Keen to know how the scanners pan out, thinking of replacing my DT30's with a set.

    Keep the photo coming.
    This space for rent.

  5. #5
    Join Date
    Jan 2011
    Location
    Santa Cruz, CA
    Posts
    309

    Default

    So, I got the 445 firing (wouldn't have been able to do it without Heroic, j4cobo, and Platinum... in fact they kept me from blowing another diode). Here are some pics:

    photo (5).JPG
    photo (6).JPG

    Too light out for beam pics... but here is the spot (uncorrected... I didn't even attempt to adjust the lens)

    photo (7).JPG

    I progress, slowly but surely. Next, I will correct the beam and get it all fitting in the housing.

    Thanks again to those that helped me out on chat.

  6. #6
    Join Date
    Aug 2007
    Location
    Portland
    Posts
    1,355

    Default

    Keep up the good work. You've definitely picked some good components to start with compared to most DIY first-offs.

    Kudos!

    - Jonathan

  7. #7
    Join Date
    Sep 2007
    Location
    Texas
    Posts
    807

    Default

    Hmmm... a doorknob in the background? That didn't take long

    I too have contemplated the 473 enclosure. Looking good Sal.

    Greg
    "Information not shared, is information lost forever"

    Join ILDA
    Support Photonlexicon

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •