RGB Laser 1350mW for 5700USD!!???

[Evolve]

Lucky-5 :
Red laser(635nm):550mw; Green laser(532nm):500mw; Blue laser(473nm):300mw
Scanner: High speed XY Scanner Module (scan speed>30kpps;scan angle±40°;input signal ±5v;linearity distortion<2%) CTI 6210
Control Mode: Sound Active; DMX; ILDA; Auto Run;


http://www.artlaser.net/defaulten.asp

Is this for real?? I emailed and he told me the laser is only $5700 usd

[buffo]

Sounds like a hell of a deal. I'd make sure they're quoting optical output though. Some of the chinese manufacturers include the waste IR from the pump diode in the output specs of their DPSS units. Ask them if they have IR filters on the blue and green units.

Adam

[Evolve]

Sounds like a hell of a deal. I'd make sure they're quoting optical output though. Some of the chinese manufacturers include the waste IR from the pump diode in the output specs of their DPSS units. Ask them if they have IR filters on the blue and green units.

Adam

This is the reply that I got

Yes, the power mention below is optical-output, and we often marked it minimum power. That's say, when u check it with a meter by yourself, the actual power out is more than we marked here.

We also have RGB500 here:
Red laser(635nm)>250mw; Green laser(532nm)>200mw; Blue laser(473nm)>50mw

Scanner: High speed XY Scanner Module (scan speed>30kpps;scan angle±40°;input signal ±5v;linearity distortion<2%)

Control Mode: Sound Active; DMX; ILDA; Auto Run;

The Price is $ 4,580.00 including flight-case.

Here, i think all the laserist know that the scanner from Cambridge CTI6215 is almost the best, stable is more important than the speedy. 30kpps is perfect with beam shows and cartoons. Would u like to pay more money on a small-beer thing(10kpps more)?

And IR filters thing, if u know much about the DPSS diodes, that the wavelength come out from it are definite, so there will be no IR or UV emission to hurt humanbodies. You can set one hundred percent heart at rest.

We also have Analog Diodes RGB in the stock, if u like, i can show to u.

[liteglow]

I deal from Art Laser
I trust them and think the quality is OK 8)

[jordan200]

Chinese products have the price advantage and the quanlity is not bad too!