Here is drawing as attachment, note the TL084 wont even turn on without VCC(+) and VSS(-) of at least 8 volts each.. So you need a minimum of plus eight and minus eight for the opamp to turn on.
Steve
Here is drawing as attachment, note the TL084 wont even turn on without VCC(+) and VSS(-) of at least 8 volts each.. So you need a minimum of plus eight and minus eight for the opamp to turn on.
Steve
Qui habet Christos, habet Vitam!
I should have rented the space under my name for advertising.
When I still could have...
Yes, sorry!
I was trying to remember the Due characteristics from memory!
I remember that it doesn't run on 5v, but at the lower rail voltage of 3.3v. I've got the circuit diagram for 5 to 3.3 & vice-Versa voltage translators. But no, I didn't realise the DACs were of a higher resolution, or had the 1/6 & 5/6 of the 3.3v Vref. I will bear your kind suggestions in mind.
Thanks, Simon.
Thanks Grix,
I hadn't previously been able to get your circuit diagrams open using my iPhone before.
But with those direct links I can see how useful your circuits are.
Thanks, I will fire-up MultiSim & UltiBoard & model the circuits.
Thank-you very much,
Simon.