pangolin quick show

[Megatron]

Hi,

Is it possible to control Martin scanners and moving heads from quick show to set up a full light and laser show??

[cyberb0b]

If you connect an Enttec Pro to your machine, Quickshow can also handle DMX, with Quick DMX.. So, yes it possible.

[Megatron]

If you connect an Enttec Pro to your machine, Quickshow can also handle DMX, with Quick DMX.. So, yes it possible.

Cheers mate will have to look into getting this when I get quick show

[norty303]

It's been said before, but if you want to control moving lights, use a dedicated desk/controller. Whilst you can do it with a laser controller, it's not really designed with that in mind, and will probably be like pulling teeth in comparison to doing it with the right tool.
In the same way that you can control some lasers with DMX, but a dedicated DAC is usually better...

[Megatron]

It's been said before, but if you want to control moving lights, use a dedicated desk/controller. Whilst you can do it with a laser controller, it's not really designed with that in mind, and will probably be like pulling teeth in comparison to doing it with the right tool.
In the same way that you can control some lasers with DMX, but a dedicated DAC is usually better...

I will keep this in mind. I would like to be able to run a laser show and have the lights come in on cues to a piece of music with the laser and not have to control separately but if thats the way its done so be it i will have to look into a separate control.