Results 1 to 8 of 8

Thread: Got my ILT 5500A working

  1. #1
    Join Date
    Apr 2012
    Location
    Beaverton, OR
    Posts
    299

    Default Got my ILT 5500A working

    I had posted about trying to get an old ILT 5500A argon head running. Djmatt happened to have the right supply for it so I bought that and it arrived today.

    It works! Took about a minute to start up the first time but fires right up after time-out every time now.

    Had a couple issues, first the power supply was intended to run off of 208v, not 240 which I have here. I popped it open and managed to figure out which taps on the filament and small signal transformer were for 240 and swapped around the wires. Second problem is this power supply only supplies 120v to the fans, not 240 for the fans that were installed, simple fix, replaced the fans. I also found that the fans only come on when thermal switches in the head turn it on kind of worried me for a minute. This way the fans shut down after it cools even if you turn off the power supply.

    After a little mirror tweaking I got 4.8 to 5v out of the Power Monitor jacks on the side. I am thinking this is 480 to 500mw which would make sense, the optics are TEM00 broadband. The only power sensor head I have is a Coherent 150W unamplified head. It responds but at .06v/w it does not give me any useful info. A friend has a bunch of laser power meters so I will borrow one to test it.

    Ill post some pics later.

  2. #2
    Join Date
    Jul 2007
    Location
    west sussex uk
    Posts
    2,280

    Default

    We like pictures
    When God said “Let there be light” he surely must have meant perfectly coherent light.

  3. #3
    Join Date
    Apr 2012
    Location
    Beaverton, OR
    Posts
    299

    Default

    OK, here we go. I don't have a grating so I really can't do much about splitting up the beam other than killing the DVD I had.


    IMG_2212 by macona, on Flickr


    IMG_2213 by macona, on Flickr


    IMG_2215 by macona, on Flickr


    IMG_2222 by macona, on Flickr


    IMG_2229 by macona, on Flickr


    IMG_2235 by macona, on Flickr

  4. #4
    Join Date
    Oct 2010
    Location
    Athens, Greece
    Posts
    1,930

    Default

    that's a really nice presentation there!!!
    an argon and metalworking machinery

    can i have some more please?
    "its called character briggs..."

  5. #5
    Join Date
    Apr 2012
    Location
    Beaverton, OR
    Posts
    299

    Default

    Made a mistake. it is TEM01 not TEM00. Looking carefully at the beam with goggles on shows it is definitely 01. Not like I care... I have no clue what I am going to do with this thing now that it works.

    This is the lathe, 1942 Monarch 10EE. Drove down to Los Angeles to get it (~900 miles) Rebuilt it, repainted it, replaced the ward-leonard drive with a 5kw Mitsubishi Servo motor. That is 7.5HP continuous and 21.5HP intermittent (or until the breaker trips). Anilam SuperWizard DRO on carriage, cross slide, and compound. One of the only manual lathes still made in the USA. Current price is about $100k from what I have heard.


    Monarch 10EE Lathe by macona, on Flickr

    My cnc mill, A Supermax YCM-16VS. Came out of the Tektronix model shop. They had it converted to CNC in 1989, I got it a few years ago and replaced the dying control. I have since replaced all the servos with mitsubishi brushless servos and replace the spindle motor with a 3.5KW brushless servo. I can rigid tap with it now.


    Supermax CNC mill by macona, on Flickr


  6. #6
    Join Date
    Oct 2009
    Location
    Eindhoven, The Netherlands
    Posts
    921

    Default

    Quote Originally Posted by macona View Post
    Made a mistake. it is TEM01 not TEM00. Looking carefully at the beam with goggles on shows it is definitely 01. Not like I care... I have no clue what I am going to do with this thing now that it works.
    You could add an AOM on it and use it as a blue-only laser or as a basis for a nice laser harp project. I still think the argon-blue is one of the best colours to have for a harp project, since it's just really, really bright.

    Is your 5500 an air cooled or a water cooled unit? The fans are temperature controlled, and the laser itself is quite conservative with its heat output. When I'm running my ILT on idle current (a 5490 at 6A/106V) it hardly gets warm and the fans only kick in minutes after startup. It's kind of scary to see a beam coming out of the aperture and the head being eerily silent, though.

    My cnc mill, A Supermax YCM-16VS. Came out of the Tektronix model shop. They had it converted to CNC in 1989, I got it a few years ago and replaced the dying control. I have since replaced all the servos with mitsubishi brushless servos and replace the spindle motor with a 3.5KW brushless servo. I can rigid tap with it now.
    Cool! Any chance you could spare some machine time in the future and fab some breadboards or base plates? I think a lot of us would be interested in having components fabricated.

  7. #7
    Join Date
    Apr 2012
    Location
    Beaverton, OR
    Posts
    299

    Default

    Oh, like I need other projects. I really need to get my laser cutter finished before I forget how to do it.

    With how cold it has been in my shop the fans actually turn on and off while it is running.

    Breadboards might be a possibility.

  8. #8
    Join Date
    May 2009
    Location
    Sacramento, California
    Posts
    610

    Default

    Ive got two 5500A systems & I love em!
    Will there be three phase!!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •