Page 4 of 4 FirstFirst 1234
Results 31 to 37 of 37

Thread: Heavy Yellow

  1. #31
    Join Date
    Nov 2007
    Location
    SoCal / San Salvador / NY
    Posts
    4,018

    Thumbs up

    Heh, you finally got 'er tamed.. Great werk, Sire.. now, to just get you into one of the 80W-ers (..and that's out the *fiber*, ~130W of 532 under the hood (!)..) so you can 'co-pump' another cel, w/ the SR-640, and we can have a nice 'ÜbeRYGB' shindig.. Seriously, tho.. hats-off, and Congrats.. You are going to be making -the- most-amazing 'sine-waves in the snow' this winter, I 'call it', right now..

    ..nice kontroller, btw..
    j
    ....and armed only with his trusty 21 Zorgawatt KTiOPO4...

  2. #32
    Join Date
    Feb 2011
    Location
    New Hampshire
    Posts
    3,513

    Default

    Ya, this is working really well; especially the controller. SR 640 in my secrete sauce and tweaking the resonator with a refractive element to increase the beam waist would be fun. Will the EO Vis.-O degree survive 20MW cm2? You have struck a nerve, however. As I see it there are four routs to solve the RED DILEMMA.

    1. Multiple diode array
    2. Unusual DPSS source (the red "LS"), but here the divergence will probably once again be a problem.
    3. Alternative sources of 0ps$
    4. The dye route. Are you serious? Are these 80W's becoming available?

    Plug and play is practical, especially if you need to be highly mobile, but these exotic systems are a kick.

  3. #33
    Join Date
    Nov 2007
    Location
    SoCal / San Salvador / NY
    Posts
    4,018

    Thumbs up

    Quote Originally Posted by planters View Post
    ..Will the EO Vis.-O degree survive 20MW cm2?
    ..only one way to find-out..

    Quote Originally Posted by planters View Post
    Unusual DPSS source (the red "LS"), but here the divergence will probably once again be a problem.
    Nah, iirc, it was always more an-issue of the x-tal temp-stability / output-stability.. pretty-fussy, from what I hear.. and 660nm, meh...

    Quote Originally Posted by planters View Post
    The dye route. Are you serious? Are these 80W's becoming available?
    ..what, me joke?? hehe.. Yes, they've been 'aftermarket-available' for some time, *but*, still carry (usually) a good 5-digit price tag.. I've seen them as low as ~$15K, but.. that's a raw unit, and they are a fair-bit more complex to convert... Still, pretty-sure you could very-confidently count-on 2x 40-45W of pump, sans-fiber.. I don't think you'd even wanna *try* pumping one of those dye-cells, w/ more than that..

    ..Yeah, these are 'a project', but, just you try and produce 16-18+ Watts of 630-640 - for far, far-less than 6-digits - with that kind of beam.. I'm sure we could 'improve' the Red, w/ a different optics set.. I mean, just lookit that Y you've cooked up in yer kitchen.. simply marvelous..

    Am-'subscribed'..
    j
    ....and armed only with his trusty 21 Zorgawatt KTiOPO4...

  4. #34
    Join Date
    Feb 2011
    Location
    New Hampshire
    Posts
    3,513

    Default

    Jon,
    Now I know what you meant by an unearthly white. Yellow and blue make a white that I swear makes you think you see a pink-white beam. Despite significant variations in the relative power, the beam just seems to get brighter. This is the "dark side" of the chromaticity diagram. This is very weird. I'm starting to think there might be something to these 3+ color projectors. I mean, you "should" be able to create the full range of visible colors with a mix of the three primary colors so what's the big deal with saturation? Maybe this is what happens; the eye can detect a broad RANGE of frequencies and the brain interprets more than just the vector intersection from the three arbitrary vertices of the diagram. This makes sense, as we evolved to operate under a broad band (thermal) source and we are just interpolating when we see a "color" from three lasers. I just hope I can source enough dichroics.

  5. #35
    Join Date
    Jan 2007
    Location
    Florida
    Posts
    4,382

    Default

    Well, look at the sun thru a prism. It's a rainbow of colors. That's what a white-light laser should produce (imho) .

  6. #36
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,114

    Default

    Quote Originally Posted by planters View Post
    Jon,
    Now I know what you meant by an unearthly white. Yellow and blue make a white that I swear makes you think you see a pink-white beam. Despite significant variations in the relative power, the beam just seems to get brighter. This is the "dark side" of the chromaticity diagram. This is very weird. I'm starting to think there might be something to these 3+ color projectors. I mean, you "should" be able to create the full range of visible colors with a mix of the three primary colors so what's the big deal with saturation? Maybe this is what happens; the eye can detect a broad RANGE of frequencies and the brain interprets more than just the vector intersection from the three arbitrary vertices of the diagram. This makes sense, as we evolved to operate under a broad band (thermal) source and we are just interpolating when we see a "color" from three lasers. I just hope I can source enough dichroics.
    Wait till you try it with TWO yellows different by about 12 nanometers....

    I have optics that can get both 568 and 575 out of a krypton at the same time. Its mind boggeling what you can do with 530, 575,568, and 482 with no red...

    red + yellow + 482 blue can do a very crazy white spectrum that you will NEVER see with RGB...

    I love all lines krypton lasers for exactly that reason...

    It has been found lately that the eye has a few extra sensors that do look at "other" color combinations besides R-G-B...

    Blue + yellow + fast PWM or PCAOM = really whacky stuff when scanned...

    Steve

  7. #37
    Join Date
    Feb 2011
    Location
    New Hampshire
    Posts
    3,513

    Default

    I've had a few other volunteers look at these beams and the consensus is universal. The color shifts a little from bluish pink to quite pink with a relative power ratio in the two primaries of 100:1. I suspect that just a little 532 or 630 will shift this product a lot.

    By the way the Thor labs 500nm cut off dichroic is very nice, highly selective with high throughput/rejection.

    I am having a struggle to shape the 445 array of beams into a neat square without a very noticeable spill into two vertical wings and some spot distortion. After a lot of head scratching, I believe this is due to the large dimension of the stripe (15) and the short fl of the neg. cylinder being used in the Galilean set up being used to compress this dimension (F/3). I'll try a couple of longer FL PCX lenses and fold the much longer arrangement on the table. Prior to the beam shaping optics the beams are very crisp without any distortion and I don't want to waste this.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •