Results 1 to 5 of 5

Thread: Crystalaser Output Coupler Coating Failure on 532nm Green Laser

  1. #1
    Join Date
    Jun 2012
    Posts
    3

    Question Crystalaser Output Coupler Coating Failure on 532nm Green Laser

    Hi All, New to the site... I posted a similar question on the Technical Forum.

    We have a Crystalaser Laser Model Number GCL-025-M it is a Green 532nm Laser with an Output Coupler Coating Failure. This seems like a bizarre part to fail with standard environment non-heavy use so we are trying to decide whether it is more cost-effective to have the unit repaired or to go with another manufacturer and have the unit replaced.

    If you have any idea/suggestions re: the Coupler Coating failure... I would appreciate hearing them! If you can suggest alternate manufacturers with a similar product, please reply or PM. The GCL025M is the older model 532nm... the new model is CL532 025 L Thank you! ;-)
    Last edited by CuriousLaserGirl; 06-06-2012 at 13:31.

  2. #2
    swamidog's Avatar
    swamidog is offline Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,836

    Default

    Hi CuriousLaserGril

    Welcome to PL there's a member named Gogu that used to sell used crystalaser heads and AOMs. He may be able to provide some new/used output couplers for you. Try sending him a private message and good luck.

    .c


    Quote Originally Posted by CuriousLaserGirl View Post
    Hi All, New to the site... I posted a similar question on the Technical Forum.

    We have a Crystalaser Laser Model Number GCL-025-M it is a Green 532nm Laser with an Output Coupler Coating Failure. This seems like a bizarre part to fail with standard environment non-heavy use so we are trying to decide whether it is more cost-effective to have the unit repaired or to go with another manufacturer and have the unit replaced.

    If you have any idea/suggestions re: the Coupler Coating failure... I would appreciate hearing them! If you can suggest alternate manufacturers with a similar product, please reply or PM. The GCL025M is the older model 532nm... the new model is CL532 025 L Thank you! ;-)
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  3. #3
    Join Date
    Jun 2012
    Posts
    3

    Default

    Thanks Swamidog! I will send Gogu a PM. Do you know if he repairs broken CrystaLaser's?

    It seems to us that a coating problem is a manufacturer defect or vendor quality control issue and that Crystalaser should ask the vendor to replace the part on our behalf. I am not holding my breath though. :-(

  4. #4
    swamidog's Avatar
    swamidog is offline Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,836

    Default

    That I don't know. I can tell you that a number of people here have done business with him (myself included) and he's reliable and good to work with.

    Quote Originally Posted by CuriousLaserGirl View Post
    Thanks Swamidog! I will send Gogu a PM. Do you know if he repairs broken CrystaLaser's?

    It seems to us that a coating problem is a manufacturer defect or vendor quality control issue and that Crystalaser should ask the vendor to replace the part on our behalf. I am not holding my breath though. :-(
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  5. #5
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,114

    Default

    Considering most Chinese lasers use the same standard sets of output couplers, have you considered just ordering one from Red Optronix or Casix?
    Gluing them in is not that difficult. Most companies use the same focal lengths and transmission for a given laser. However, if its under warrenty, consider getting it repaired.

    One neat thing about a "planned" economy, is they use the same standard sets of parts...

    Steve

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •