Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: 100 mw 473nm analog blanking

  1. #1
    Join Date
    Jan 2006
    Location
    S.E. Florida
    Posts
    483

    Default 100 mw 473nm analog blanking

    I guess it is not such a good deal after all. But remember the shipping. He is drop shipping from china. I would have been shipping from the USA after testing each unit and shipping was included.

    So the offer is pulled.
    "Gravity its not just a good idea its the law"

  2. #2
    Join Date
    May 2006
    Location
    Native Floridian
    Posts
    3,081

    Default

    Fred,

    Who is the manufacturer? You can get a Lasever 100mW 473nm module for less than 1100 now from Aijii.

    http://cgi.ebay.com/LE473-100-100mw-...QQcmdZViewItem

    I have a Lasever blue laser and it has been pretty good so far.

    David

  3. #3
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,693

    Default

    you guys can also have the CNI 100mw blues at the price of the lasever units Whilst the build quality of the lasever ones is good, the CNI units build quality is superior..
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

  4. #4
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,488,500

    Default

    The laser in that E-bay auction only supports analog blanking to 20Khz. According to Fred's post, the one's he is getting will go all the way up to 30Khz. Not sure if it's the same company or not, but the specs are different.

  5. #5
    Join Date
    May 2006
    Location
    Norway, Fauske
    Posts
    1,206

    Default

    it says: The laser has great beam specs, and comes standard with TTL modulation.

  6. #6
    Join Date
    Jul 2005
    Location
    Lancashire UK
    Posts
    1,372

    Default

    Dave said ....
    you guys can also have the CNI 100mw blues at the price of the lasever units Whilst the build quality of the lasever ones is good, the CNI units build quality is superior..
    I just recieved a 150mW 473 from Dave / Aijii .... and its the CNI type and the build quality is fantastic , Power supply and heatsinking and air cooling are miles ahead of the Lasever units, most of all the beam qualty is sharp with little divergence over 60ft or so and very very stable

    I purchased an RGB set from dave and the overall quality is good

    i will put a seller review and results of my testing up shortly


    all the best ......... Karl

  7. #7
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,693

    Default

    Quote Originally Posted by cruch
    it says: The laser has great beam specs, and comes standard with TTL modulation.
    Did you read the next line?

    These lasers actually come with both TTL AND analogue as standard.

    The Mod input is quoted at 30Khz in the manufacturers spec sheet, looks like our ads have a typo or 2 :lol:
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

  8. #8
    Join Date
    May 2006
    Location
    Norway, Fauske
    Posts
    1,206

    Default

    thanks for info!

  9. #9
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Default

    Quote Originally Posted by dave

    The Mod input is quoted at 30Khz in the manufacturers spec sheet, looks like our ads have a typo or 2 :lol:
    As I have pointed out... 2, maybe 3 times... :twisted:

    :roll: :lol: :roll: :lol: :roll: :lol: :roll: :lol: :roll: :lol: :roll: :lol: :roll: :lol: :roll: :lol:
    Love, peace, and grease,

    allthat... aka: aaron@pangolin

  10. #10
    Join Date
    Sep 2006
    Location
    Beijing
    Posts
    85

    Default cheap and good blue laser

    We can provide favorable price blue laser , VA-I-N-473-100mW : 1100$ , The price is include the laser head and power driver , our laser power driver is VD-II-N , it has scan to post the current and temperature change , you can adjust the current , and the power will have relative power . the driver has two modulation : TTL 0-30Khz / Analogue modulation 0-10Khz . if you are interested in our laser or you order in quantity, I would like to give you a discount .

    www.viasho.com
    Nono Shen

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •