I've been looking at ebay but didn't find any.
edit: Didn't find any at a better price than those from medialas that is.
I've been looking at ebay but didn't find any.
edit: Didn't find any at a better price than those from medialas that is.
You know, I have one simple request. And that is to have sharks with frickin' laser beams attached to their heads!
We should have some prices for everyone on Monday
KVANT Australian projector sales
https://www.facebook.com/kvantaus/
Lasershowparts- Laser Parts at great prices
https://www.facebook.com/lasershowparts/
Hey... Just spotted this thread...
A couple of years back, I purchased bounce mirrors that look identical to the ones in the images above from a company called PULSE which is a division of OmniSistem. They are OK, but not great- when looking at them, everything has a very slight pinkish tint to it, which leads me to believe that they are not even approaching 100% reflective at 532nm, maybe 80% or so. :? Upon closer examination, I found that they are far from perfect flatness- they all seem to be a llittle bit distorted. This is most noticeable if one tries to look at themselves in the mirror at a distance of 5m or so- the image gets pretty distorted. My bathroom mirror from IKEA is flatter than these! :roll:
I use them at the moment to do shows and they work ok for small venues where the distance from one bounce to the next is pretty small, but even so- after a couple of bounces, the combined distortions turn the round beam into a pancake shape- proportions of about 10:1.
So whoever is going to source them- get a single sample first and check for all of the above problems before buying a whole bunch of them :!:
Oh, and if they are good, sign me up for 10 of them
Another option- I am working with an Asian optics company to source some small 1.5" X 1.5" front-surface mirrors. The samples I got were great, reflectivity is ~95% (these are apparently used for some rear-projection tvs or something). So if someone can make or source brackets as pictured above, then I can supply the mirrors, and they can be silliconed on... I will see what kind of price I can get on 4" X 4" mirrors (standard bounce mirror size).
Yet another option- if those ebay mirrors and brackets are cheap, andt he mirrors are not good, we can just use them for the brackets and install the better mirrors right over the existing ones- what do you guys think?
Dimitry Fedorov, President
LASERGLOW.COM LIMITED
tel. 416.729.7976
fax. 480.247.4864
e-. dimitry@laserglow.com
web. www.laserglow.com
Spending money on good mirrors is not a problem for me. It's the mount that's to expensive. The price I quoted in my first post where without mirrors. And I havn't had any luck with ebay.
You know, I have one simple request. And that is to have sharks with frickin' laser beams attached to their heads!
I have several bounce mirrors and mounts if you are interested $40 each. reply back if interested and i will post pictures
Did you see these on eBay?
Here are some mirrors on E-bay that appear to be very similar to one's I've purchased in the past. They work quite well, and can even be cut with a dremel tool if you have enough patience.
Do an E-bay search for "first surface mirror" to find more.
Adam
I think he's lookin for the mounts...
Laserglow (above) was complaining about the mirrors that he had purchased that were only 80% reflective. Thus the e-bay post.
It's late for me and I'm not certain I am a sure in for the "Dumbass of the Day" award. Just trying my best.