as ive said many times before electronics arent my thing!
i believe this relay has gone in a moving head could someone point me in the right direction for a replacement?
as ive said many times before electronics arent my thing!
i believe this relay has gone in a moving head could someone point me in the right direction for a replacement?
Eat Sleep Lase Repeat
Lamp stuck on or wont strike? What makes you think the relay con?
I couldn't find a relay on digikey that you could buy only one of...
You might have to go to a local electronics shop
Here's a link to the data sheet if it helps.
http://www.sanyourelay.ca/public/products/pdf/SZ.pdf
You could show them the data sheet and ask.
Err ok lol well it's a pretty standard size so something like maplin N30AW should do. One on Ebay item 190589367009
Relays are easy to check.
Just apply the right DC voltage to the coil. (the two far pins)
And check continuity to the contacts. (look for the info in dilberts post) To see change in the normal open an Normal close.
Don't connect to anything else.
I hope this helps and my English is understandable
Cheers,
Ed
According to this
http://www.sanyourelay.ca/public/pro...es=53&listby=2
it has a 12 Volt coil
RTI Piko RGB 4 ProjectorCT6215 Scanners & CT 671 Amps; CT6210 & Medialas Microamps.RGBLaser Systems 6000mW RGB Module - 638nm/445nm/532LD2000 Pro + QM2000.net + BeyondEtherdream + LSX
Old Projector Build
Videos at http://au.youtube.com/user/loopee2