Results 1 to 5 of 5

Thread: converting bmp/jpg to frames

  1. #1
    Join Date
    May 2006
    Location
    Norway, Fauske
    Posts
    1,206

    Default converting bmp/jpg to frames

    any good software for converting bmp/jpg to frames ?

  2. #2
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,489,446

    Default

    Anarchy will do it. Pretty sure Mamba Black has a tracer utility as well.

    Say - don't you have an Alphalite? The Alphalite software comes with an image-to-ilda conversion tool. I've used it a few times, and it works. Best to start with a 2-color image though. Go in and edit the image first to smooth out any lines that might be really irregular.

    Adam

    EDIT: After further research, I've discovered that Anarchy doesn't support automatic tracing. It does allow you to load a background image (.bmp) and then trace the image manually, however.
    Last edited by buffo; 04-23-2007 at 03:21. Reason: Correction

  3. #3
    Join Date
    May 2006
    Location
    Norway, Fauske
    Posts
    1,206

    Default

    It worked bebore! But now I get invalid trace color

  4. #4
    Join Date
    Jul 2005
    Location
    Lancashire UK
    Posts
    1,379

    Default

    On my alphalite ..... before you click on trace image.... you have to click the mouse onto the dark lines in the image to select the trace colour first

    if it defaults to white it comes up as invalid trace colour so make sure you click on a dark colout on the image first to set the trace colour

    and i normaly set the final output colour to green

    hope this helps


    Karl

  5. #5
    Join Date
    May 2006
    Location
    Norway, Fauske
    Posts
    1,206

    Default

    I will try! ;D Tnx

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •