Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: Galvos wanted in good condtition trade/buing

  1. #1
    Join Date
    May 2006
    Location
    Norway, Fauske
    Posts
    1,206

    Default Galvos wanted in good condtition trade/buing

    I want a galvo set with 10 or 15k speed.
    Using only for beamshows.

    Price less than nothing! hehe

  2. #2
    Join Date
    Mar 2006
    Location
    Massachusetts
    Posts
    194

    Default

    These are good. And from Aijii here on this forum
    http://cgi.ebay.com/15kpps-Scanner-G...QQcmdZViewItem

  3. #3
    Join Date
    Jan 2005
    Location
    USA
    Posts
    457

    Default

    Ive got some dirt cheap ones.

  4. #4
    Join Date
    May 2006
    Location
    Norway, Fauske
    Posts
    1,206

    Default

    let me know Spec! ;D

  5. #5
    Join Date
    Jan 2005
    Location
    USA
    Posts
    457

    Default

    3 sets here, one needs mirrors. They all work, I killed a couple pairs forever ago and figured out they are "hammerable" up to 20kpps. 10-15 is a lot safer.

    I have wiring diagrams here somewhere, they use single ended inputs.

    $200 shipped for either pair with the mirrors

    $175 shipped for the one without mirrors, I figure $25 is more than adequate for mirror replacements.

    If you(or any other interested parties) happen to be out of the US, add a few bucks to cover the shipping difference.



    Larger image in my gallery.

  6. #6
    Join Date
    May 2006
    Location
    Norway, Fauske
    Posts
    1,206

    Default

    am looking on Aijii auction...it is included show board! ;D

  7. #7
    Join Date
    Jan 2005
    Location
    USA
    Posts
    457

    Default

    Quote Originally Posted by cruch
    am looking on Aijii auction...it is included show board! ;D
    Good luck getting that to work with LDS.

  8. #8
    Join Date
    May 2006
    Location
    Norway, Fauske
    Posts
    1,206

    Default

    its for standalone...

  9. #9
    Join Date
    Aug 2006
    Location
    North West England
    Posts
    1,148

    Default

    Whats the problem with it working with LDS?
    It as the usual XY connennections on the driver card.
    It also only needs a multipole push switch so that you can switch between the dmx/avr and ILDA.

    Jim

  10. #10
    Join Date
    Jan 2005
    Location
    USA
    Posts
    457

    Default

    LDS is software, there is no DAC in this equation as he sold his Riya on the forum a while ago.

    He could very well have a DAC but I have not read anything to confirm that.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •