Steve,
I noticed the overwhelmingly bright display does not do justice to the beam quality and so I will do a video of a show in full light and I think I might use your "Final Countdown" if that's OK.
More shows please!
Steve,
I noticed the overwhelmingly bright display does not do justice to the beam quality and so I will do a video of a show in full light and I think I might use your "Final Countdown" if that's OK.
More shows please!
Oh yeah! Try it!
You can test my last job also:
http://www.photonlexicon.com/forums/...2&d=1350506984
And if some of my shows will be worthy, then shoot a movie and let see us!
Greetings!
my webpage
http://stevemilani.jimdo.com
Skype ID: stevemilani957
my RGB analogue projectors:
3.9 W (640/532/445) 30kpps
2.6 W (655/532/450) 30kpps
2.5 W (638/532/450) 30kpps
0.7 W (test unit)(635/532/473) 18kpps
YES!!!!
another solid video from sir planters!
thanks so much for this, precious info about the long pass filters and your spatial filtering approach
"its called character briggs..."
Thanks planters
Great info , these fliters how much $$ and wheres the best place to get them ?
When God said “Let there be light” he surely must have meant perfectly coherent light.
The filters I am using are from Edmund Optics 1/2 inch=$125,1inch=$175. The 1/2 inch they sent me was mounted in a very fat metal ring and so the CA was 8mm-too small. This might have been a bad part or typical and I just returned it as they specify 90% CA. The models are 552nm for the green and 446 for the blue.
Hi Planters, I watched your video last night on my Android phone. It was interesting, informative and captivating as usual. Thanks a heap. Loved the section regarding spacial filtering.
Your using a lot of Peltier cooling. Do you find your main optical plate walks at all (if any) with the temperature gradients that surely must exist?
Also, I noticed a small stray beam hitting a Lasorb in your red module. I hope it's low enough power as to not burn through the lasorb over time!
Thanks for taking the time to make this video, you have re-sparked a fire in me.
This space for rent.
I didn't notice the stray beam. Thanks, I'll check out the lasorb before I run it again.
I am sure the plate does distort-a little. The surface around the outside of the plastic cover boxes becomes warm to the touch, but definitely lower than normal skin temp. All alignments are done without cooling, but just like so many things I did not need to worry about, the alignment remains stable.
What we need now is a gb on those
Long pass filtersanyone ?
When God said “Let there be light” he surely must have meant perfectly coherent light.
You might want to pick up a set first and verify my results as these are expensive. Note ;E.O. has a 30 day return policy if the product is returned in good condition and does not meet expectations.What we need now is a gb on those
Long pass filters anyone ?