Page 1 of 7 12345 ... LastLast
Results 1 to 10 of 61

Thread: Anti-reflect coated windows

  1. #1
    Join Date
    Oct 2005
    Location
    Melbourne, Australia
    Posts
    678

    Default Anti-reflect coated windows

    Guys,

    Who would be interested in anti-reflect coated windows ? We have a source for this, and are considering buying a substantial quantity and getting it cut to size for resale...

    <1% reflectivity...

    Need some suggestions on size, thickness, etc..

    Cheers,

    adrian
    Now proudly stocking and offering the best deals on laser-wave

    www.lasershowparts.com
    http://stores.ebay.com.au/Lasershow-Parts

  2. #2
    Join Date
    May 2006
    Location
    Norway, Fauske
    Posts
    1,206

    Default

    and I have no clues what that is! More info and even picture?

  3. #3
    Join Date
    Oct 2005
    Location
    Melbourne, Australia
    Posts
    678

    Default

    AR coated pieces of glass for the laser aperture of your laser projector...

    So you can seal up your laser projector's optical table but still let 99% of the laser light out...

    Using normal glass sucks - 10% reflection..
    Now proudly stocking and offering the best deals on laser-wave

    www.lasershowparts.com
    http://stores.ebay.com.au/Lasershow-Parts

  4. #4
    Join Date
    Aug 2006
    Location
    North West England
    Posts
    1,148

    Default

    I know that I need some for my home brew but dont know how much it will be.

    I only need about 2"x3"

    Jim

  5. #5
    Join Date
    May 2006
    Location
    Norway, Fauske
    Posts
    1,206

    Default

    sure...That is a good idea!! I need that! ;D

  6. #6
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,648

    Default

    im interested if the price is right?
    Eat Sleep Lase Repeat

  7. #7
    Join Date
    Sep 2006
    Location
    OH, USA
    Posts
    114

    Default

    Likewise, depends on the price

  8. #8
    Join Date
    Oct 2005
    Location
    Melbourne, Australia
    Posts
    678

    Default

    Okay.

    We are looking at getting 100mm by 100mm by 4mm pieces at this stage. I'll have a sample soon.

    We have used 3mm on a previous run of projectors, and depending on the angle that you were looking from, you couldn't even tell that the glass was there!

    Anyway, this stuff is good - both sides are ar-coated, and the response graphs are pretty flat in the visible spectrum, all up around 98-99% transmission...

    Don't have pricing info yet - that will follow.
    Now proudly stocking and offering the best deals on laser-wave

    www.lasershowparts.com
    http://stores.ebay.com.au/Lasershow-Parts

  9. #9
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,489,446

    Default

    aijii;

    Are you buying one sheet that is 10 cm by 10 cm and then cutting that down, or are you saying that the final size you want to deliver will be 10 cm square and you are actually buying a much larger sheet?

    I would like to get a couple pieces of this stuff, but 10 cm on a side would be too large. Is it something that I could cut myself with a glass cutter to get it to fit the projector window? (It's not tempered glass, is it?)

    I'm interested, assming the price is OK. (Shipping will need to be considered as well...)

    Adam

  10. #10
    Join Date
    Oct 2005
    Location
    Melbourne, Australia
    Posts
    678

    Default

    Buffo,

    I was saying we'd buy a big sheet, and get it cut it up to 10cm^2 pieces....

    If this is too big, what would you prefer ?
    Now proudly stocking and offering the best deals on laser-wave

    www.lasershowparts.com
    http://stores.ebay.com.au/Lasershow-Parts

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •