Page 6 of 6 FirstFirst ... 23456
Results 51 to 59 of 59

Thread: Laserscope KTP

  1. #51
    Join Date
    May 2006
    Location
    Norway, Fauske
    Posts
    1,206

    Default

    That was bright as hell!!

    Pangolin FB3 QS/LivePro/SMS2Laser
    Riya MultiBus
    Pangolin LD2000 Pro

  2. #52
    Join Date
    Jul 2005
    Location
    Lancashire UK
    Posts
    1,379

    Default

    and with all those exhaust fumes coming off the bikes ... who needs a hazer


    all the best ... Karl

  3. #53
    Join Date
    Nov 2007
    Location
    Bend Oregon USA
    Posts
    3,350

    Default

    Quote Originally Posted by Banthai View Post
    and with all those exhaust fumes coming off the bikes ... who needs a hazer


    all the best ... Karl
    You cant say this too many times at any gig...but..."THE SMOKE WAS PERFECT!"

  4. #54
    Join Date
    Jan 2008
    Posts
    21

    Default

    Hey guys. I know this is an old thread, but it seemed the appropriate place to ask this question.
    I have the opportunity to get hold of a laserscope KTP crystal with heater system for under $300. I was rather tempted by the thought of acquiring a cheap SSY-1 Nd:YAG head just to try things out with ($150 ish off ebay).
    A) would this be a good place to start
    B) any guesses on output power (I know it'll be small compared to a laserscope's full potential)
    C) anybody be interested in the crystal / heater setup
    D) should I be able to turn such a thing into a decent green with some sort of powerful pump I would assume it would sell well?

    Thanks. And yes I know I'm a noob.

  5. #55
    Join Date
    Jun 2007
    Location
    Lake Geneva, WI.
    Posts
    2,704

    Default

    Quote Originally Posted by BlueFusion View Post
    Hey guys. I know this is an old thread, but it seemed the appropriate place to ask this question.
    I have the opportunity to get hold of a laserscope KTP crystal with heater system for under $300. I was rather tempted by the thought of acquiring a cheap SSY-1 Nd:YAG head just to try things out with ($150 ish off ebay).
    A) would this be a good place to start
    B) any guesses on output power (I know it'll be small compared to a laserscope's full potential)
    C) anybody be interested in the crystal / heater setup
    D) should I be able to turn such a thing into a decent green with some sort of powerful pump I would assume it would sell well?

    Thanks. And yes I know I'm a noob.
    You could make it lase however, you'd never get close to CW; maybe 1hz pulses if your lucky.

    Here's a video of a modded laserscope up and running.

    http://www.youtube.com/watch?v=5EYNxaZyoPc

  6. #56
    Join Date
    Jul 2008
    Location
    Miami
    Posts
    506

    Default laserscope ktp

    laserguy532, can you run that big green off of two 120 volt lines?
    Last edited by Laser Zone; 09-06-2008 at 12:44.

  7. #57
    Join Date
    May 2007
    Location
    Romania
    Posts
    1,041

    Default

    Quote Originally Posted by aijii View Post
    So... who on here has one of these ?

    got pics ? stories ? tips and tricks ? anything one should be aware of before a purchase?

    we have, but still developing for show use

  8. #58
    Join Date
    Jul 2008
    Location
    Miami
    Posts
    506

    Default laserscope

    Quote Originally Posted by andyf97 View Post
    we have, but still developing for show use
    How tuff is it to develop for show use ? I heard that the beam is quit large.

  9. #59
    Join Date
    May 2007
    Location
    Romania
    Posts
    1,041

    Default

    The beam is a simle issue, it exists around 3mm but controlling it is quite tricky as all the optics concirned have to be high power which also means high cost.

    Blanking is another issue, there are several ways but we try a new one.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •