Results 1 to 3 of 3

Thread: TTL/Analog Red, Green, and Blue Lasers...

  1. #1
    Join Date
    Oct 2012
    Location
    chicago, il
    Posts
    49

    Laser Warning TTL/Analog Red, Green, and Blue Lasers...

    Hello,
    I am looking for some 500mw~1000mw laser modules that are TTL and analog.
    What is a good/ reliable brand and/ or where would the best place be to fine this type of laser modules?

    On a side note these are the ones I'm looking at right now.. Any thoughts/concerns?? ((I will be using all three in a RGB laser projector with DT-40 pro galvanos))


    445nm blue 500W

    http://www.ebay.com/itm/500mW-Blue-4...item3cc626f0b5

    658nm Red Diode Laser Module

    http://www.ebay.com/itm/Research-Lab...item19d617592e

    500mW Green 532nm DPSS Laser

    http://www.ebay.com/itm/Stage-Lighti...item1c2a11c8ae

  2. #2
    Join Date
    Apr 2009
    Location
    Zürich-Bangkok-Dubai
    Posts
    275

    Default

    Hello there!

    Why do you want to mix TTL and Analog , better to go all with Analog , with TTL you will only get 7 Basic colour and that's it,
    Also since you have a DT 40 , I would recommend Analog modulation for all modules ,

    For the red , I would recommend you 637-640nm range , the 635 & 650+ nm range are like a torch like , so you are going to waste beam spilling out of the galvo , unless you have a bigger mirror ,

    Theres alot of guys here they can recommend you which module to go for , keep in mind , the good reds are going to cost $$$$


    Cheers!
    Philipp Wetter

  3. #3
    Join Date
    Dec 2008
    Location
    veenwouden
    Posts
    2,579

    Default

    The quality of your projector will be determined by beamquallity and low divergence and a good pair of scanners. The better the modules alre the better it looks like a PRO- Projector.

    Have a look here:


    http://www.photonlexicon.com/forums/...ichel-rietveld


    Michel rietveld has also dt40,s and my modules.


    If this is what you want shoot me a PM regarding the modules you need.


    Interested in 6-12W RGB projectors with low divergence? Contact me by PM!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •