-
TTL/Analog Red, Green, and Blue Lasers...
Hello,
I am looking for some 500mw~1000mw laser modules that are TTL and analog.
What is a good/ reliable brand and/ or where would the best place be to fine this type of laser modules?
On a side note these are the ones I'm looking at right now.. Any thoughts/concerns?? ((I will be using all three in a RGB laser projector with DT-40 pro galvanos))
445nm blue 500W
http://www.ebay.com/itm/500mW-Blue-4...item3cc626f0b5
658nm Red Diode Laser Module
http://www.ebay.com/itm/Research-Lab...item19d617592e
500mW Green 532nm DPSS Laser
http://www.ebay.com/itm/Stage-Lighti...item1c2a11c8ae
-
Hello there!
Why do you want to mix TTL and Analog , better to go all with Analog , with TTL you will only get 7 Basic colour and that's it,
Also since you have a DT 40 , I would recommend Analog modulation for all modules ,
For the red , I would recommend you 637-640nm range , the 635 & 650+ nm range are like a torch like , so you are going to waste beam spilling out of the galvo , unless you have a bigger mirror ,
Theres alot of guys here they can recommend you which module to go for , keep in mind , the good reds are going to cost $$$$
Cheers!
Philipp Wetter
-
The quality of your projector will be determined by beamquallity and low divergence and a good pair of scanners. The better the modules alre the better it looks like a PRO- Projector.
Have a look here:
http://www.photonlexicon.com/forums/...ichel-rietveld
Michel rietveld has also dt40,s and my modules.
If this is what you want shoot me a PM regarding the modules you need.
Interested in 6-12W RGB projectors with low divergence? Contact me by PM!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules