Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Help with Mitsubishi Quad setup

  1. #1
    Join Date
    Aug 2011
    Location
    Cape Town, South Africa
    Posts
    236

    Default Help with Mitsubishi Quad setup

    Hi all,

    Trying to put together a mitsubishi 635nm Quad. Idea is to do a typical knife edge as seen with 445 diodes with flex mounts and use Dave's lenses to correct the beam, and avoid waveplates and prisms.

    With standard red lenses from DTR, how big is the beam going to be is stacked like this: |||| ? My mirrors are 7mm.

    Can anyone offer some advice regarding this?

    Thanks,
    Fabian.

  2. #2
    Join Date
    Jan 2007
    Location
    Florida
    Posts
    4,382

    Default

    Which mitsubishi diodes. the 170mw single mode, the 300mw or the 500mw ?

  3. #3
    swamidog's Avatar
    swamidog is offline Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,835

    Default

    why not use a pbs cube to get this: #? your beam will have the same divergence on X and Y axis.

    Quote Originally Posted by Humphry View Post
    Hi all,

    Trying to put together a mitsubishi 635nm Quad. Idea is to do a typical knife edge as seen with 445 diodes with flex mounts and use Dave's lenses to correct the beam, and avoid waveplates and prisms.

    With standard red lenses from DTR, how big is the beam going to be is stacked like this: |||| ? My mirrors are 7mm.

    Can anyone offer some advice regarding this?

    Thanks,
    Fabian.
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  4. #4
    Join Date
    Aug 2011
    Location
    Cape Town, South Africa
    Posts
    236

    Default

    300mw my apologies

    Quote Originally Posted by swamidog View Post
    why not use a pbs cube to get this: #? your beam will have the same divergence on X and Y axis.
    Anyone know the approximate beam diameter after correction of 3 pbs'ed with 3?

    Also can anyone recommend a particular collimating lens, or will the standard DTR collimating lens work fine for correction?

  5. #5
    Join Date
    Jul 2007
    Location
    west sussex uk
    Posts
    2,280

    Default

    You will need , diode mounts,2mmfl lens , mirror mount , pbs cube, and a wave plate , and a cylinder lens set from dave.
    Should give you a 4x4mm beam @ 1.09 mrad if setup correct ,and it a pain to set up too , but worth it if your prepaired to spend the time on it.
    You could loose the pbs and wave plate, and stack them and should get a 6x4mm beam
    If you go with anything over the 2mmfl lens like dtr's lenses expect a big divergence
    When God said “Let there be light” he surely must have meant perfectly coherent light.

  6. #6
    Join Date
    Feb 2011
    Location
    New Hampshire
    Posts
    3,513

    Default

    With standard red lenses from DTR, how big is the beam going to be is stacked like this: |||| ?
    Do not stack them like that. Stack them like: == Don't use prisms, but a wave plate and a PBS will allow you to stack them like: -- and then expand them more aggressively for lower divergence.

    You actually do not want to knife edge them side by side, but rather stack them end to end as above.

    If you go with anything over the 2mmfl lens like dtr's lenses expect a big divergence
    In my experience this is not true. The 4mm Optima lens produces exactly twice the near field beam dimensions and 1/2 the far field divergence. Using this lens just cuts the required beam expansion ratio in half, but the overall performance is the same:nothing lost or gained with this choice.

  7. #7
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    Why don't you set it up do some testing and let us know your findings?

    Quote Originally Posted by Humphry View Post
    300mw my apologies



    Anyone know the approximate beam diameter after correction of 3 pbs'ed with 3?

    Also can anyone recommend a particular collimating lens, or will the standard DTR collimating lens work fine for correction?
    Eat Sleep Lase Repeat

  8. #8
    Join Date
    Jul 2007
    Location
    west sussex uk
    Posts
    2,280

    Default

    Oops mybad
    Yeah what eric says on the lenses , i got it wrong
    Having a dumb moment, the 2mmfl lens keeps the apeture beam small enough
    To stack better.




    Quote Originally Posted by planters View Post
    Do not stack them like that. Stack them like: == Don't use prisms, but a wave plate and a PBS will allow you to stack them like: -- and then expand them more aggressively for lower divergence.

    You actually do not want to knife edge them side by side, but rather stack them end to end as above.



    In my experience this is not true. The 4mm Optima lens produces exactly twice the near field beam dimensions and 1/2 the far field divergence. Using this lens just cuts the required beam expansion ratio in half, but the overall performance is the same:nothing lost or gained with this choice.
    When God said “Let there be light” he surely must have meant perfectly coherent light.

  9. #9
    Join Date
    Aug 2011
    Location
    Cape Town, South Africa
    Posts
    236

    Default

    Hey Planters,

    So in your amazing projector you stacked them vertically. Why not just rotate each diode 90deg and the correction lens set 90deg and do the typical knife-edge thing and save time-consuming milling? I know there is a reason but I just can't work it out!

    What confuses me a bit is the spot at 100mm vs 10m. Are we talking about the spot near-field before the one axis diverges, or far-field?

    Quote Originally Posted by planters View Post
    Do not stack them like that. Stack them like: == Don't use prisms, but a wave plate and a PBS will allow you to stack them like: -- and then expand them more aggressively for lower divergence.
    You actually do not want to knife edge them side by side, but rather stack them end to end as above.
    In my experience this is not true. The 4mm Optima lens produces exactly twice the near field beam dimensions and 1/2 the far field divergence. Using this lens just cuts the required beam expansion ratio in half, but the overall performance is the same:nothing lost or gained with this choice.

  10. #10
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,702

    Default

    Flipping 90 deg becomes a pita aligning the cylindrical lens pair
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •