
Originally Posted by
Bradfo69
Swami took care of giving you a number of excellent reasons why the first projector is a better choice than the second. I'll add a couple more. The first laser's wavelengths are 650, 532 and 445 whereas the second uses 650, 532 and 405nm. First of all, most common projectors are all going to be 532 for the green. Most of your less expensive projectors such as these are going to use 650nm for red. It's the blue and, in this case violet, where you see more variations. Keep in mind the eye sees certain wavelengths easier than others. We see green the easiest so, it doesn't take a lot of laser power to see it. As you move to the red and the blue ends of the visible spectrum, you need more laser power to create an equal amount of brightness. 405nm approachs the ultraviolet or invisible end of the spectrum so, you need a lot more power to match the other colors. It's also a wavelength that some people see very differently. As it blends with the green and red, the resulting colors will be very different than with 445 so, I would lean towards the one with 445.
As Swami said, in the same spec they're saying air cooled and TE cooled. I would be willing to bet there are no TEC's in the box and that it's really air cooled. The chinese aren't known for their tech writing skills - hence the definition in the second projectors description of "scream show" as a color. Huh??? I'd bet many who write the ad copy couldn't tell you what a scanner speed or scan angle actually means.
Simply from the pictures and past experience, I'm going to make an assumption and say the build quality and materials are better in the first one. The case just looks more robust. The second blue one is most assuredly a very flimsy sheet metal with terrible machining. I'd venture to say non adjustable dichros and lots of hot melt glue. The case of the first one just "looks" visually more solid and, I suspect if we had shots of the inside you would find it put together with just a little more quality. Maybe even some method of adjusting your alignments which will likely need to be done from time to time.
Len's suggestion of a REKE 500RGB above is also a good idea. No, still not legal.... but for an inexpensive entry into the hobby and something to fool around with in your basement, it's a pretty decent little projector for $200-$300. But, at the end of the day, I'd still suggest saving up a bit more money and try to find a used X-Laser as they are probably your least expensive entry point into this hobby legally in the US.