red and blue modules on discount now!!!!

[edison]

He guys

To thank all people here on Pl who supported me the last couple of years i decided to give a temperary discount on the following modules until the 28th of february.

Red 637nm/ 500mw
Beam at aperture : 3x2mm (slightly bigger possible for even a lower divergence when using 7x12mm mirrors!!! )
divergence: < 0.65mrd full angle.
tec cooling : yes
analog modulation: > 100khz
Overheatings protection: yes
standby beamsuppresion : yes
Dimensions: 95 x 60 x 40.

Price: was 950 excl vat now 850 euro excl vat. Buy 3 or more and you get another 10% of !!!!



blue 450nm/ 1.5 watt
Beam at aperture : 3mm x 3mm (slightly bigger possible for even a lower divergence when using 7x12mm mirrors!!! )
divergence: < 0.65mrd full angle.
tec cooling : yes
analog modulation: > 100khz
Overheatings protection: yes
standby beamsuppresion : yes
Dimensions: 95 x 60 x 40.



Price: was 850 excl vat now 750 euro excl vat. Buy 3 or more and you get another 10% of !!!!



Thanks guys for all the support and for those who are attending the Lem they can see them in a Projector and standalone

[edison]

Here are some beamshots of the blue and red. And how it looks in a projector. I will show these also on the LEM in action

[sbk]

Is thé green module from you too?

[svandescheur]

That's looking great mr. Edison ! I'm a big fan of your modules
May i ask where the telescopes are for ?
Is there inside the correction optics or some secret lenses ?
Is that to perform better at larger distances "lower divergence" ?
Very nice setup you have build inside. looks very clean & organized !

Sander

[badger1666]

What brand is the scan set in the first pic ?

Here are some beamshots of the blue and red. And how it looks in a projector. I will show these also on the LEM in action

[dave]

Looks like a raytrack from JM laser

The Green looks like a CNI OEM-F with all the markings removed

What brand is the scan set in the first pic ?

[daction]

I am expecting my red module this week. My daughter has been at me to produce a nice pink. I showed her the picture from above and she looked impressed. "cool pink daddy"

[Pelikan]

Hi Edison

Is that blue made of single 1.5W nichia diode? I somehow can't see how you can get that spec out of it...

Thanks.

[badger1666]

Hi Edison

Is that blue made of single 1.5W nichia diode? I somehow can't see how you can get that spec out of it...

Thanks.

Hey martin there is a way to get those specs
Its complicated , not sure that edison uses this method
But it involves throwing away the normal way of collimating
These diodes, and i will be looking at trying this myself when funds allow

[Pelikan]

Sorry Chris I didn't express myself properly - I don't get how it can be done so cheap rather then whether it can be done.