Small 3W RGB projector

[RGB LASER VERKOOP]

This is the new Luminous XS
only 203x220x200mm
30k scanners
powercon in out
DMX in out
ILDA in out
Swap x / y
8.3kg projector only
15.kg projector + case
dust proof split level
green cni oem H: 1000-1700mW
blue 1200mW 445nm
red 700mW - 637nm multi mode with small beam ( 30mm at 26meters)
we have 2 flightcase models. 1for 1 projector and 1 for 2 projectors
more info or price email me info@laserverkoop.nl
we like to improve our systems every month, so if you have tips, i happy to hear them by email thanks!




full power:

[Bradfo69]

I'm really scratching my head at your combination of powers and wavelengths. First of all, this is the first 673 I've ever heard of and... only 700mW to match up with 1.7 of green and 1.2 of blue??? That just sounds very strange. I'd love to see the color of 673 of course but, it seems you'd need an awful lot more - or at least less green for a decent white, no?

[laserdj]

Must be a typo, surely it´s 637, not 673...

[Bradfo69]

Must be a typo, surely it´s 637, not 673...

That would be my suspicion but, ya gotta ask...

[carlos3621]

http://www.eightonlight.cn/products/.../0127/182.html

yup, manufacture's website does indeed state "637" not "673"


or maybe this one

http://www.eightonlight.cn/products/.../0114/180.html

[astatic]

I think 673nm should be 637nm and then it will be a little more in balance.
It depends how Joost is building his projectors, if he doesn't care that full power isn't in balance then it's no problem.
When i see collor balance on high end systems for example Arctos, these systems deliver 3.9W full power and 3W balanced white.
So with his numbers i would expect a balanced white maybe somewhere around the 1.8/2.0W

But why do we have to send "tips" to your e-mail?
Why not discuss them over here.
You make advantage of PL by your advertisement, why not let everyone take advantage from the updates!?

[Picasso]

My tip, order blank rear plates so you can ditch the autoshow and dmx

[RGB LASER VERKOOP]

Yes good tip, and i would like it also.
But i still have clients who would like to use the dmx options so they can controle the lasers one by one to make chases etc...

Yes it was a typing mistake must be 637nm.
it is a brightlight costume made moduul RB with 1mrad and good matching to the green
I not use the eighton lasers and also my laser projector is much smaller! It is the smallest one with 3W output i ever have seen! smaller then the piko from rti :-)

[edison]

The size of the projector is to small to fit in 2 seperate modules from china. So an RB module was the best solution. Besides the 635nm,s have a fat beam and most blue,s from china have no optical beamcorrection. Although its not completely ballanced it gives a very decent white. The power is quite big and you can fit easily 6 of them in the trunk of a car. The aim was a compact projector with allot of power that is relatively cheap in the market for such a size. It depends on your needs, if you need allot of power in a small case and do mainly beamshows this is for sure an Option.

[neutrino]

How much for two and a flight case.
How much do they weigh too?

Cheers
Rich