Results 1 to 4 of 4

Thread: Advice on shipping an ALC60X

  1. #1
    Join Date
    Jan 2011
    Location
    Santa Cruz, CA
    Posts
    309

    Default Advice on shipping an ALC60X

    I just purchased a few of these units from another member on the forum.

    I found this regarding shipping gas lasers in the FAQ: http://www.repairfaq.org/sam/laserlps.htm#lpsshp

    Does anyone have experience shipping these types of units specifically? Failures and successes would both be helpful.

    Thanks.

  2. #2
    Join Date
    Sep 2007
    Location
    Texas
    Posts
    807

    Default

    I can only speak to how I received mine some 20 years ago. Head wrapped in multiple layers of big bubble-wrap, power supply wrapped in same manner, then each was shipped in its own separate large box, tightly packed all sides in packing peanuts. Worked well, as both arrived with no issues. YMMV...

    Good Luck,
    Greg
    "Information not shared, is information lost forever"

    Join ILDA
    Support Photonlexicon

  3. #3
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,114

    Default

    60X are tough. Wrap in five layers of the large bubble wrap. Place in inner cardboard box a few inches longer and wider then the wrapped head. That box gets filled with peanuts. The outer box is much bigger then the inner box. It gets a outer layer of the fat one or two inch think pink or white foam insulation from home depot. The inner layer is more peanuts.

    The purpose of the outer foam is to keep the head somewhat centered and away from the walls of the box.
    The peanuts need a layer of air to work when adsorbing impacts.

    Fedex and US Postal Service are pretty good about accepting and caring for "fragile" objects if fragile is declared up front and stickers are on the box. Fedex insurance does not cover "long glass tubes" so just declare it as a laser or instrument.

    UPS, well, its OOPs for a reason, mainly because of how its sorting bins work.



    Steve

  4. #4
    Join Date
    Jan 2011
    Location
    Santa Cruz, CA
    Posts
    309

    Default

    Thanks Greg and Steve.

    Your your feedback is along the lines of the initial idea. Thought it a good idea to double check.

    -Sal

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •