Results 1 to 9 of 9

Thread: 650nm... new hope?

  1. #1
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default 650nm... new hope?

    Driving home the other night I got to wondering... with all the experimentation taking place these days by some pretty smart people with red diodes and various correction optics, is 650nm still really a dead end? I'm certain people have experimented to death in the past trying to get a decent beam but, I'm also thinking that was probably a few years ago. I think people, (myself included) don't even give it consideration as useful for anything other than cutting a straight line with a circular saw or, what you're always going to expect to find in a cheap chinese box. Just wondering if there might be any new ideas.

    It's still a stupid inexpensive source of red and it's a shame that there seems to be no way of being able to take advantage of that. Even if you start with a few watts for $500 and lose a watt or two in the process of taming it or spilling off the mirrors, who cares?? If you end up with a couple watts of red for just a few hundred bucks, it seems worth looking at.

    Any enlightenment? I wasn't around back in the day to know the trials and frustrations.
    Last edited by Bradfo69; 02-24-2013 at 14:54.

  2. #2
    Join Date
    Feb 2010
    Location
    Melbourne, Australia
    Posts
    1,106

    Default

    Given the longer wavelength, 650 requires more power to achieve the equivalent perceived brightness of 637nm etc. so there's also a safety factor to consider. I've swapped out my 660nm diodes for 637nm ones and get a brighter laser with less mW. But then we can crowd scan here, so perhaps less of concern for you guys over the pond.

  3. #3
    Join Date
    Oct 2010
    Location
    Wiltshire, UK
    Posts
    579

    Default

    In my limited experience with these type of diode, LPC 822, 826, 836, they are very unreliable. I only built a PJ as a hobby and every time the thin was switched on it would lose a diode, agreed they where cheap but a pain in the butt replacing them.

    I had 2 quads built with up to 2.4W and it had nothing on the output of my current quad using 4 Mitui G71's and putting out 1.7W.

    Tony.
    Squat that bug,

    One day I'll finish my build.
    https://www.facebook.com/Azteclasers?fref=ts

  4. #4
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default

    I guess I should preface the above by saying... I was wondering about improving the big beam coming from a regular 650nm module, like a CNI or something. My thought was if there were any new lens combinations, or telescope ideas or anything like that?

  5. #5
    Join Date
    Oct 2010
    Location
    Athens, Greece
    Posts
    1,930

    Default

    well, brad, i guess with the 300 and 500mw 638mitsu diodes we all got lucky we only had 60 and 100um of emmiter size to tame

    those 650nm have way nastier beam specs, so not much can be done really, at least not much that would make sense
    "its called character briggs..."

  6. #6
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default

    True... I guess.

    One thing I AM sort of thinking about and maybe someone can chime in as to feasibility but, what about taking like two 1 watt 650's, PBS 'em and use them in a beam table like a Mobolazer ML 10 or something?

  7. #7
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,248

    Default

    It's cheaper to buy the same brightness 640/637/638 than 650 before you start to get into new correction optics. You need about 1/3rd the power of 650 to be as bright
    Frikkin Lasers
    http://www.frikkinlasers.co.uk

    You are using Bonetti's defense against me, ah?

    I thought it fitting, considering the rocky terrain.

  8. #8
    Join Date
    Oct 2010
    Location
    Athens, Greece
    Posts
    1,930

    Default

    Quote Originally Posted by Bradfo69 View Post
    True... I guess.

    One thing I AM sort of thinking about and maybe someone can chime in as to feasibility but, what about taking like two 1 watt 650's, PBS 'em and use them in a beam table like a Mobolazer ML 10 or something?
    or a huge lumia to paint a whole wall of the venue. lumia loves fat divergent beams
    "its called character briggs..."

  9. #9
    Join Date
    Oct 2008
    Location
    Portland
    Posts
    1,566

    Default

    I am all for more wavelengths... but 637 diodes are in my next build. I don't mind the 650-660 but don't like the open can of a lot of them.

    -Adam
    Support your local Janitor- not solicited .

    Laser (the acronym derived from Light Amplification by Stimulated Emissions of Radiation) is a spectacular manifestation of this process. It is a source which emits a kind of light of unrivaled purity and intensity not found in any of the previously known sources of radiation. - Lasers & Non-Linear Optics, B.B. Laud.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •