Page 3 of 3 FirstFirst 123
Results 21 to 22 of 22

Thread: AixiZ - 200mw 650nm module

  1. #21
    Join Date
    Dec 2006
    Location
    Pflugerville, TX, USA
    Posts
    1,977

    Default

    Sorry to sidetrack the topic but I have that same DMX board the all three TTL outputs perform blanking for me. I can plug my laser module into all of them and the image has blanking. But I keep hearing that only one works. So, I am not sure what is up. But thats OK since I don't plan on using the DMX board.

  2. #22
    Join Date
    Aug 2006
    Location
    North West England
    Posts
    1,148

    Default

    I would imagine that it depends on the program that has been put into the AVR which is probably more to do with what projectors each manufacture is going to use the board in.
    If they use the board in a mono projector the AVR is probably only programmed to output on the green channel, however if they us it in a RGB then all three outputs will be enabled.

    Jim

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •