Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Mobolazer ML10- 250 Help

  1. #1
    Join Date
    Mar 2013
    Location
    Colorado
    Posts
    6

    Unhappy Mobolazer ML10- 250 Help

    I got a ML10 250 from the bowling alley where I work. It was taken down a few years ago to do some painting, and never re installed. Is there anyone or anywhere I could send this to and make sure its still operable and/or repaired. All cables were cut, but I think its all here. dmx, scan head, sc100, keylock,etc. Any help would be appreciated Thanks Kelly

  2. #2
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default

    "All cables cut". That should not be an issue as the cables should only consist of the power cord and then just standard DMX cables. Before you spend the money to ship it somewhere to be looked at, we should talk you through things to check first. Where in the world do you reside since you're location isn't mentioned in the profile? Also, do you own a DMX controller?, (as one will be necessary)

  3. #3
    Join Date
    Mar 2013
    Location
    Colorado
    Posts
    6

    Default

    Sorry bout that, i am in Colorado, and I do have the dmx that originally came with the unit. I do have the cut cables too. thanks for the help

  4. #4
    Join Date
    Nov 2007
    Location
    SoCal / San Salvador / NY
    Posts
    4,018

    Lightbulb

    Hi Kelly -

    First, +1 to what Brad said.. before you go shipping anything, 'a picture is worth a.... ..and half a dozen or so, posted-here, might just be about all the help you'd need.. this community is really-awesome at helping folks with cut cables...

    Quote Originally Posted by kellythomasmiguel View Post
    ...Is there anyone or anywhere I could send this to and make sure its still operable and/or repaired.
    ..IF it comes to that, I am actually meeting with the founder of Mobo, in May / June, down here in Cali.. he's going to be (Attention everybody-else.. hauling-out of storage / listing-up, here, and also eBay, a bunch of old ML-parts / some chassis / boards / actuators, positioners, etc, and so, I am sure, between him and another tech we have here (..NOT-myself, I'm way-too over-loaded.. I am sure we could get it up and running, if you haven't by then...

    fwiw..
    j
    ....and armed only with his trusty 21 Zorgawatt KTiOPO4...

  5. #5
    Join Date
    Dec 2006
    Location
    denver,co
    Posts
    1,078

    Default

    Hi Kelly,

    First, What Jon Said. Second I am in the denver area so if you get stuck I could probably help. The big question is whether the laser still fires.

    chad


    When the going gets weird, the weird turn pro.


  6. #6
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default

    Yes, that will be the first order of business. That and perhaps picking up a couple new DMX cables from your local music store. On the back of the mobo itself, there should be a couple of spots for connecting DMX cables. You may just have 5 pin, or 3 pin or a mixture of both. (I have 3 ML-10's and they're all a little different.) Primarily what we're concerned with now is your DMX in. Is it 5 or 3? Next is the "interlock". That should most likely be three pin and also mate up with your keyswitch.

    If your DMX in is only 5 pin, then finding a cable is a tad more difficult but, still readily available. How about your DMX controller? Does it have 5 or 3 pin out? We'll need to see if an adapter is necessary.

  7. #7
    Join Date
    Mar 2013
    Location
    Colorado
    Posts
    6

    Default

    I will get pics up toight, I am at the bowl right now and going thru all cables and i believe I have found some to work. Thanks for help so far. I would love to see this work and possibly let it go on to someone that can use it.

  8. #8
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default

    Quote Originally Posted by kellythomasmiguel View Post
    I would love to see this work and possibly let it go on to someone that can use it.
    !!!


    Looking forward to the pics.

  9. #9
    Join Date
    Mar 2013
    Location
    Colorado
    Posts
    6

  10. #10
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default

    Ok, basically you are fine. Aside from needing a good cleaning, looks like you just need a few DMX cables. If we're lucky, you can just go to a local music store. If we're not, you may have to place an order on the internet. At this point... in order to test it, you need two DMX cables. I'd suggest maybe 25 foot just for the heck of it. You could get away with 3 foot cables just for testing but, if you keep this, you'd want longer ones. (If you ultimately sell it to me , I've got 'em.) The first one is a fairly standard 3 pin cable - you don't have to buy "DMX" rated cable at this point - just a microphone cord is fine. It will go between the keyswitch box and where it says "remote interlock in" on the back of the mobo. (I think 2nd from the left.) That's what basically turns the thing on and off.

    The next cable may be more tricky. On the back of the DMX controller (last photo on the right), how many pins does the "DMX out" have? If it's 5 then you need a 5 pin DMX cable which may be hard to source locally but google it and you should find someplace cheap to buy one. They're not as common as 3 pin. If the controller has a 3 pin DMX out, you should be golden. Just get a second DMX cable to run from the controller to the "DMX in" on the back of the mobo.

    At this point, don't worry about the one that's broken. It appears it goes between the SC100 controller and the scan head in the turret all the way to the right when you're facing the front of the mobo. We'll deal with that later. The big question is whether she still fires up and whether the actuators all work.


    Let me know when you've got the cables and we'll go through the rest.

    Edit - Upon closer inspection, it looks like the cable is actually one that somone bastardized to go from 5 pin to 3 pin. It may actually work but, honestly, for the few bucks the cables cost, I'd just pick up a couple new ones.
    Last edited by Bradfo69; 04-03-2013 at 08:06.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •