GSI 325 scan mirrors for 25 or 30 mm pupil

[hobbs]

Hi, all,

I have a 20-year-old instrument prototype--a particle detector that works inside plasma chambers, http://electrooptical.net#isicl .

I have a customer who wants me to resurrect it, but the coatings on the GSI 325 series closed-loop galvos are completely shot. I could try finding a shop to recoat and remount the old ones, but I'd much prefer to get a replacement set.

Of course Cambridge killed off that product line long ago.

The ones I need are relatively large:

37 x 25 mm elongated octagon line scan, 4.75 mm shaft, 3.25 mm thickness

30 x 43.5 rectangular frame scan, 4.75 mm shaft, 3.25 mm thickness.

Anybody here have either or both that they'd be willing to part with, or know whom to ask?

Thanks

Phil Hobbs

[swamidog]

Dr. Hobbs,

Try giving Fred and Amanda at One Stop Laser Shop a call. They might be able to cut what you need or point you to the proper resource.

Phone: (727) 441-1805 Fax: (727) 441-3051 Email: Sales@OneStopLaserShop.com
http://www.onestoplasershop.com/home.htm

good luck!

Hi, all,

I have a 20-year-old instrument prototype--a particle detector that works inside plasma chambers, http://electrooptical.net#isicl .

I have a customer who wants me to resurrect it, but the coatings on the GSI 325 series closed-loop galvos are completely shot. I could try finding a shop to recoat and remount the old ones, but I'd much prefer to get a replacement set.

Of course Cambridge killed off that product line long ago.

The ones I need are relatively large:

37 x 25 mm elongated octagon line scan, 4.75 mm shaft, 3.25 mm thickness

30 x 43.5 rectangular frame scan, 4.75 mm shaft, 3.25 mm thickness.

Anybody here have either or both that they'd be willing to part with, or know whom to ask?

Thanks

Phil Hobbs