E-Stop Questions
The "Linna' 500RGB projectors recently gotten by ~10 members(both forums)
have a 'remote' jack on the back and although the E Stop is available from LK
only the plug(2 prong) is provided.
Linna tells me that LK sells the rest (looks like it comes with a very long cord, btw)
& She says an E-Stop can be DIY built as well. my question is: Does it necessarily indicate that it is not wired properly if the PJ will work without the plug(w/orw/o) attached?
I have run this projector both ways and N/Ps . . On projectors that come with the complete E stop must it be plugged for the projector to operate? Also have any of you built your own E Stop from parts? I would think it would be an easy project- key switch with key not removable in the 'on' position and a large red button switch that, IIRC, once pressed would require more than just pulling the button to make the PJ work again.
Also I would like to hear some info please about the delayed start- how would one go about modding a working PJ so it would have a delay? & how long does the delay need to be? thanks for any help you can give me......Len