Results 1 to 5 of 5

Thread: AD-534 Replacement

  1. #1
    Join Date
    Nov 2023
    Posts
    94

    Default AD-534 Replacement

    Looking at the circuits in the laser lightshow handbook. Has any tried using AD-734 multipliers in-place of AD-534's as summing amps and in the rotation circuit? The datasheet says they are pin compatable.

  2. #2
    Join Date
    Jun 2009
    Location
    St. Louis, MO
    Posts
    1,198

    Default

    I believe there's a z axis rotator in the CYGN-B thread using the AD633. I'm sure you could make the AD734 work, but it's more expensive.
    "There are painters who transform the sun into a yellow spot, but there are others who, with the help of their art and their intelligence, transform a yellow spot into the sun." Pablo Picasso

  3. #3
    Join Date
    Nov 2023
    Posts
    94

    Default

    Appreciate your input - thank you. I would like to move this discussion over to my analog console build thread.

  4. #4
    Join Date
    Nov 2008
    Location
    Cleveland Ohio
    Posts
    2,599

    Default

    Quote Originally Posted by Kevint View Post
    Appreciate your input - thank you. I would like to move this discussion over to my analog console build thread.

    I have used the 633 and it works very well. Expensive but works.

  5. #5
    Join Date
    Nov 2023
    Posts
    94

    Default

    Quote Originally Posted by kecked View Post
    I have used the 633 and it works very well. Expensive but works.
    Awesome. Thank you.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •