Eye Magic 9.5mm aperture scanners

[logsquared]

Anyone have a set of the large aperture scanners they want to sell?

[dsli_jon]

Hi L2 -

You after 4000s? Or 7000s, with larger app. mirs? And, what is your 'app' (Large diode-array, or KTP; scanning (shows) or marking, etc) I ask, as we have a pair of CT 6220s, with large-app mirs for WL and KTP (green) we're not needing.. Also, a set of 12mm-ap mirs, for CO2, but that actually do-well with 445.. not-so with 532, tho.. but, can't use them...

Lemme know, Have some 4000s we'd (reluctantly..) sell, and the CT 6220s.. I can post-up some pix, of either set.. No EMS 7000s FS, sorry..
fwiw
j

[logsquared]

Looking for the 4000's with the 9.5 ap mirrors. I have some CT 6230's here. But no mirrors. The CT mirrors and mounts are so pricey It would be better to buy new 4000's. Application is diode/ dpss RGB with lots of 445.

How big are your 6220 mirrors? What kind of KPS will they do?

thx

[dsli_jon]

Hey L2 -

...But no mirrors. The CT mirrors and mounts are so pricey..

Yeah, you can say that-again.. $535. just for an XY-pair 10mm mirs, and no, they don't come with a tube of K•Y.. >_<
...You got a mount? We have one we could sell, reasonably-reasonable.. Lemme know..

How big are your 6220 mirrors? What kind of KPS will they do?

They are the 10mm ap, ones, like this:



..re: 'KPPS'... Well, depends what you're projecting... IIRC, figure ~12-14K with these mirs, tho, not 100% sure for 6230s, those are a bit more honkin'... 6220HPs should do ~18-20K... But if you're doing mostly aerials / beams, you should be fine...

Lemme know thoughts.. If you prefer the 4000s, I'd totally understand that.. PM is-fine to discuss price, etc..
j