Results 1 to 4 of 4

Thread: Ishow dacs pinouts help!!

  1. #1
    Join Date
    Jul 2011
    Location
    Olympia, Washington
    Posts
    67

    Default Ishow dacs pinouts help!!

    Can anyone tell me if the ISHOW dacs use all 25 pins out to the laser? I opened mine up and took a picture of the pin connector and it does not seem to me all 25 are being used. I was told that I can use CAT 5 OR 6 Ethernet cable and a 25 pin connector with a Ethernet adapter. I would like to do that cause 25 pin cable is not cheap. Here is a picture of the board. Any help would be appreciated.

    2012-11-27_20-46-19_117.jpg

  2. #2
    Join Date
    Sep 2006
    Location
    Netherlands
    Posts
    1,438

    Default

    Depends a little on the projector you are using, some single color (ttl) projectors use pin 3&16
    And if you want to use one cable you'll have to loose the interlock, (which swithches ilda mode / super sound modus on some projectors)

    Other than that:

    use twisted pair A for pin 1 and 14
    use twisted pair B for pin 2 and 15
    use twisted pair C for pin 5 and 6
    use twisted pair D for pin 7 and 25
    link 4 with 17 on the projector-side , female plug.
    link 18,19,20 and 25 on the projector-side , female plug.

  3. #3
    Join Date
    Mar 2008
    Location
    Preston, Lancashire UK
    Posts
    1,069

    Default

    2 x Stanwax Laser 3W RGB's
    2 x OPT 10W RGB
    Pangolin FB3QS + Live Pro
    1.3W Laser Harp

  4. #4
    Join Date
    Mar 2010
    Location
    Raleigh, NC
    Posts
    2,314

    Default

    Google ILDA connector. Your probably only need Pin 25 (gnd) and x+,y+,r+,g+, and b+. That's only 6 wires. iShow 2.3 DAC has an R45 port built right in for ILDA signals. It's not Ethernet. A little experimentation and looking with a magnifying glass should do the trick.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •