Page 2 of 5 FirstFirst 12345 LastLast
Results 11 to 20 of 42

Thread: 6watt 445 Build

  1. #11
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    Quote Originally Posted by norty303 View Post
    Nor do some other folks. I believe the ~1.8W single diode modules Mr Briggs was/is selling are run at normal current. He's just graded the diodes I think.

    Do you set the modules up by current or by power output? If its by power then you could actually be overdriving some of the diodes (as far as your definition of overdriving is concerned)
    they are set to 1.1amps so not over driven and hense each one gives a slightly different output
    Eat Sleep Lase Repeat

  2. #12
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,248

    Default

    It's interesting to hear differences of opinion on overdriving diodes.
    I'm very much of the opinion that for laser show use, setting up a diode CW at the recommended current is actually underdriving them once you're in a show situation and they are being subject to a duty cycle by a DAC.
    Given a diode's relatively long life cycle anyway, and the real world reduction in MTBF through moderate overdriving, I think the extra power comes cheap, especially with how quickly obsolescence comes in the solid state laser world.
    That said, 1.5W of 445 is enough for the work I do anyway (at the moment!) so I've only ever had to make the choice between 1 or 2 diodes! I've got a dual A140 445 at 1.5W and a single M140 at 1.4W, and I know which I think is preferable, both in terms of simplicity, cost and physical footprint.

    Lovely machining BTW, every time I see this stuff I think about whether I could find space in the garage for a "lathe"
    Frikkin Lasers
    http://www.frikkinlasers.co.uk

    You are using Bonetti's defense against me, ah?

    I thought it fitting, considering the rocky terrain.

  3. #13
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    Quote Originally Posted by norty303 View Post
    find space in the garage for a "lathe"
    piss my shit .
    Eat Sleep Lase Repeat

  4. #14
    Join Date
    Feb 2011
    Location
    New Hampshire
    Posts
    3,513

    Default

    I have been debating about getting a lathe (again, having owned one in the past for many years). But, what you want by far is a mill. It can be small, forget CNC, but get a DRO right out of the box and you're set. This is very useful, rewarding and not that expensive

    I think the extra power comes cheap, especially with how quickly obsolescence comes in the solid state laser world.
    Absolutly. By the time a standard 20,000 hour diode wares out there will be something better to replace it with.

  5. #15
    Join Date
    Feb 2011
    Location
    St. Louis
    Posts
    526

    Default

    Quote Originally Posted by andy_con View Post
    glad your happy with them

    9mm diodes are only rated at 1.4w each so x 8 = 11.2w without any losses

    Have I been reading the datasheets wrong? The datasheets for both the M140's and 9mm diodes give a 1.7A max rating from what I am seeing.
    9mm
    https://docs.google.com/file/d/0B_6-...it?usp=sharing
    M140
    https://docs.google.com/file/d/0B_6-...it?usp=sharing

  6. #16
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    oh well looks like im running them safe then, long life is a good selling point of my modules
    Eat Sleep Lase Repeat

  7. #17
    Join Date
    Feb 2011
    Location
    St. Louis
    Posts
    526

    Default

    Quote Originally Posted by andy_con View Post
    oh well looks like im running them safe then, long life is a good selling point of my modules
    Yep but I think those ratings are only 1000-5000 hours. The projectors from what I have been told are driven way under the diodes specs and is how they get to a 20,000 hour rating for their lamps. So you are not wrong to underdrive them to increase lifetime.

  8. #18
    Join Date
    Feb 2011
    Location
    New Hampshire
    Posts
    3,513

    Default

    So you are not wrong to underdrive them to increase lifetime.

    DTR's Laser Shop: Diodes-Drivers-Lenses-LEDs & More
    I strongly disagree. There is a balance. The datasheet says 20,000 hours @ 1.7 A This is most likely MTF and so this means 50% chance of making it this far. This is 4 hours/night (CW and not %modulated) for14 YEARS. Also, if you have more diodes the risk of having one of these diodes fail, increases with the number of diodes you are running.

    I am probably not the only one who has heard this, but there is a 4W (spec power) blue diode on the horizon. Presented @ P. West, and based on the lead time between rumor and release of the 9mm diodes I would guess these will be appearing in less than a year. Why hold back?

  9. #19
    Join Date
    Feb 2011
    Location
    St. Louis
    Posts
    526

    Default

    Yep if it were me I would be driving them a lot harder. But to each their own.

    Anyway I may not have been reading it right I thought the 20,000 was based on 1.2A.

    Last edited by DTR; 05-10-2013 at 17:24.

  10. #20
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    the 6w monster finished

    Eat Sleep Lase Repeat

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •