Results 1 to 5 of 5

Thread: Quickshow FB3 question

  1. #1
    Join Date
    Jun 2010
    Location
    Syracuse, NY
    Posts
    287

    Default Quickshow FB3 question

    I'm fairly certain I already know the straight forward answer to this question but maybe someone knows a trick or modification I can make to get the results I'm looking for. I am using a single FB3 to control two projectors, one is a multicolored RGV and the other is (at this point anyway) a single blue projector. Because the blue projector is my homemade one and is the only projector that also has an ILDA out port I have the FB3 connected to this one and then daisy chained the RGV projector to the blue. My dilemma is if I select the multicolored projector setting in Quickshow to allow full use of the RGV then I lose part of the display out of the blue projector and if I select the single colored projector setting to allow full display out of both then the RGV projector is limited to white light (or whatever color this chinese thing is trying to pass off as white). My assumption is that as long as I am using only a single FB3 to control both projectors then Quickshow does not have to capability of controlling two separate color options for the individual projectors. Is there, however, some way to modify the blue projector to get it to output the entire display even when the multicolored projector setting is enabled in Quickshow? Or perhaps Quickshow is far more sophisticated than I am giving it credit for and there is some setting I have overlooked that will allow me to select two separate color options for the two projectors...
    LASERS!!

    1x Homemade 500mW 405nm Projector
    1x Homemade 1.2W RGB Projector
    1x Lightspace Color Ray Series 6W RGB
    2x Lightspace Venus 2W RGB

    ZPL Lighting www.zpllighting.com

  2. #2
    Join Date
    Dec 2007
    Location
    NorCal / Western Caribbean
    Posts
    710

    Default

    Try connecting the blue modulation line in the blue projector to the intensity pin instead.

  3. #3
    Join Date
    Jul 2008
    Location
    My momentum is too precisely determined :S
    Posts
    1,777

    Default

    Does the FB3 have an Intensity output? Normally the intensity channel is the sum of the three colours, so if the FB3 supports this, swap the blue modulation wire from the blue channel (pin 7) to the intensity channel (pin 3).

    Ah, too late :P

  4. #4
    Join Date
    Oct 2008
    Location
    France
    Posts
    548

    Default

    Yes the fb3 have an intensity channel, but in ttl :-(

  5. #5
    Join Date
    Jun 2010
    Location
    Syracuse, NY
    Posts
    287

    Default

    Awesome! this is great news actually because the RGV projector only supports TTL and since I don't have green or red in my other projector yet there is really no need to use analog modulation. Thanks a lot!!
    LASERS!!

    1x Homemade 500mW 405nm Projector
    1x Homemade 1.2W RGB Projector
    1x Lightspace Color Ray Series 6W RGB
    2x Lightspace Venus 2W RGB

    ZPL Lighting www.zpllighting.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •