I'm fairly certain I already know the straight forward answer to this question but maybe someone knows a trick or modification I can make to get the results I'm looking for. I am using a single FB3 to control two projectors, one is a multicolored RGV and the other is (at this point anyway) a single blue projector. Because the blue projector is my homemade one and is the only projector that also has an ILDA out port I have the FB3 connected to this one and then daisy chained the RGV projector to the blue. My dilemma is if I select the multicolored projector setting in Quickshow to allow full use of the RGV then I lose part of the display out of the blue projector and if I select the single colored projector setting to allow full display out of both then the RGV projector is limited to white light (or whatever color this chinese thing is trying to pass off as white). My assumption is that as long as I am using only a single FB3 to control both projectors then Quickshow does not have to capability of controlling two separate color options for the individual projectors. Is there, however, some way to modify the blue projector to get it to output the entire display even when the multicolored projector setting is enabled in Quickshow? Or perhaps Quickshow is far more sophisticated than I am giving it credit for and there is some setting I have overlooked that will allow me to select two separate color options for the two projectors...


Reply With Quote
