Results 1 to 2 of 2

Thread: Can someone help me with this?

  1. #1
    Join Date
    Dec 2008
    Location
    veenwouden
    Posts
    2,580

    Default Can someone help me with this?

    Hello guys

    I have a module from lightspace/eightonlight etc and I did some testing and i think the NTC is broken. Now inside the module the NTC has a yellow and green wire. All wires go to a connector that is connected to the driver. Could anyone that has the same module pull of his connector and measure the resistance between the yellow and green so i know what the value of the NTC must be? Its not the one in the picture but the same only a 120mw red.

    Thanks for the help i appreciate it. I,m happy return the favour in another way
    Attached Thumbnails Attached Thumbnails P1100443.JPG  



    Interested in 6-12W RGB projectors with low divergence? Contact me by PM!

  2. #2
    Join Date
    Nov 2007
    Location
    Cairns, Australia
    Posts
    1,896

    Default

    Thats a tiny module and driver!

    Anyway, 95% of NTC's are 10K, I'd try that and see what you get. Other values are pretty uncommon.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •