Results 1 to 8 of 8

Thread: Beyond Help

  1. #1
    Join Date
    May 2008
    Location
    Australia
    Posts
    380

    Smile Beyond Help

    Hi
    All. Does anyone know how to flip and reverse an image in Beyond.

    cheers
    Photonlexicon FTP Server.


  2. #2
    Join Date
    May 2006
    Location
    Native Floridian
    Posts
    3,092

    Default

    Quote Originally Posted by tony220171 View Post
    Hi
    All. Does anyone know how to flip and reverse an image in Beyond.

    cheers
    Settings>Projector Zones>Geometric Correction

    Use the "Size" selection on the left and adjust the sliders on the right.

    I updated my Beyond not long ago and just noticed "Free-Form Mesh", that's a pretty neat feature!

  3. #3
    Join Date
    May 2008
    Location
    Australia
    Posts
    380

    Default

    Hi DZ Thanks for your reply. Sorry What I meant to say was an animation frame.
    For example if you have an animation in your work place like a bird flying from the left to the right..
    How can you flip it to fly right to left..... etc
    Photonlexicon FTP Server.


  4. #4
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,203

    Default

    Do what DZ said, flip the axis of the zone using the size control, it goes to negative numbers too. Your animation will be an exact mirror image of what it was.
    http://www.facebook.com/SubsonicSystems
    http://www.frikkinlazors.co.uk

    You are using Bonetti's defense against me, ah?

    I thought it fitting, considering the rocky terrain.

  5. #5
    Join Date
    Jan 2012
    Posts
    291

    Default

    If you want to flip the complete lasershow use:
    Go to settings - Projector secttings and on the bottom you can invert the axes (that's the mainway to do it, but you could also do it like the others say).

    If you only want to flip one animation you can do that by using the effects below the frames on the timeline, just open the postion effect and place two effect point, one at 0% and one at 100% and change the axes to -100 for instance.
    Last edited by astatic; 06-06-2013 at 20:37.

  6. #6
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,203

    Default

    Ah, I see what is meant, just change the orientation of the cue, without affecting the other cues.
    http://www.facebook.com/SubsonicSystems
    http://www.frikkinlazors.co.uk

    You are using Bonetti's defense against me, ah?

    I thought it fitting, considering the rocky terrain.

  7. #7
    Join Date
    May 2008
    Location
    Once it was called "Bel Paese" = ITALY
    Posts
    858

    Default

    Hi Tony

    It's very simple...
    Go to the control window on the right board of screen (just under the preview window)

    1) Select "effect" (green "sigma" icon)
    2) Select "Add"
    3) Select "Key effect"
    4) Select "rotation"
    5) Set Y value = 180 degrees.

    That's all mate!

    p.s.......
    A little gift to you and all Beyond users!
    Attached Files Attached Files
    Last edited by Steve Milani; 06-07-2013 at 04:22.
    my webpage
    http://stevemilani.jimdo.com
    Skype ID: stevemilani957

    my RGB analogue projectors:
    3.9 W (640/532/445) 30kpps
    2.6 W (655/532/450) 30kpps
    2.5 W (638/532/450) 30kpps
    0.7 W (test unit)(635/532/473) 18kpps

  8. #8
    Join Date
    May 2008
    Location
    Australia
    Posts
    380

    Default

    That's it whooo Thanks Steve your a legend.. How do you work this out???

    Thanks champ....
    Photonlexicon FTP Server.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •