***Unprecedented Special Offer- Pluto II RGB lasers***

[liteglow]

are there still New-Year in china ?

I tried to contact them but got no reply..
I need 2 lasers, maybe some 1-2W single colour lasers, what would be the best color vs. price ? maybe 445 blue diode 1,6W ?

[drm916]

Yea.. it is holiday over there. I am not sure when it is over. But I think it lasts from the 14th to the 21st.. or something like that.

[Bradfo69]

are there still New-Year in china ?

I tried to contact them but got no reply..
I need 2 lasers, maybe some 1-2W single colour lasers, what would be the best color vs. price ? maybe 445 blue diode 1,6W ?

Color versus price is probably going to be the 445 but, in terms of a visibility to power (and therefore dollar/monetary measurement) ratio, you're better off with 532 or perhaps 520 green. Another words, 2 watts of 445 at say $800 versus 800mW of 532 for the same $800, you're probably better off getting the green as it's going to be brighter and more visible to your audience.

[PeterB]

Hi Guys,

To add to this post, we're selling these as well.
Have a look at www.rgblaserbv.com for the models we can offer you.

Cheers,

Peter

[swamidog]

and yet you asked me to remove my post on facebook when I asked if the lasers you are selling were from lightspace...

Hi Guys,

To add to this post, we're selling these as well.
Have a look at www.rgblaserbv.com for the models we can offer you.

Cheers,

Peter

[liteglow]

Color versus price is probably going to be the 445 but, in terms of a visibility to power (and therefore dollar/monetary measurement) ratio, you're better off with 532 or perhaps 520 green. Another words, 2 watts of 445 at say $800 versus 800mW of 532 for the same $800, you're probably better off getting the green as it's going to be brighter and more visible to your audience.

Yes, visibility is green best, but do you get 1W green for 400$ with scanner?
I can get 1W 445 with 20k scanners for 400$ and some easy replacement with 2W 445 (90$) then we are about 500$ for 2W, and 2W 445 can you match that with green for under 500$ for a complete scanner?

My only concern if I buy the 1W blue is that the 20K galvo will be slow and hard to use together with my other 40k


Why cant someone sell me a ready Scanner case without the blue module and galvo :P

[edison]

and yet you asked me to remove my post on facebook when I asked if the lasers you are selling were from lightspace...

RGBlaser tried to sell several brands like Able , eightonlight, fous and now only focussing on one brand it seems. The good thing is that he provides service and warrenty. But of course he doesn,t like that someone posts the real brandname because then a potential customer know where he can buy the same thing directly for less money. That is why i,m totally not interested in becoming a reseller since everyone can be one. Get a webshop and some re-branding and youre done. That is why there are so many

The only solution is to develop something of your own.

[Datsurb]

Why cant someone sell me a ready Scanner case without the blue module and galvo :P

I got a 1watt 445 from Goldenstar a while back, and it was dirty cheap incl flightcase. Looking to replace the module with a 462 i built from the usd35,- 9mm diode i got from fleabay.

If there are "an emergency" for you i have 3 pcs blue single color in Oslo/Norway available for use.
1 dual module around 3 watt
1 single module doing around 3 watt
1 single module doing around 1 watt

All with 20K scanner build for beams.

Just PM me if you are interested

[PeterB]

and yet you asked me to remove my post on facebook when I asked if the lasers you are selling were from lightspace...

That's correct. Here in PL they are a known source and I was only posting it here in a response to someone else looking for similar models. Secondly, this is now done by myself, I chose to do so.

FB on the other hand is something completely different in my view. At that time and in that topic I felt it was misplaced.
I was , at that moment, glad you respected my request and had removed it

Thanks again.

Cheers,

Peter

[PeterB]

RGBlaser tried to sell several brands like Able , eightonlight, fous and now only focussing on one brand it seems. The good thing is that he provides service and warrenty. But of course he doesn,t like that someone posts the real brandname because then a potential customer know where he can buy the same thing directly for less money. That is why i,m totally not interested in becoming a reseller since everyone can be one. Get a webshop and some re-branding and youre done. That is why there are so many

The only solution is to develop something of your own.

In general you're correct Johan. I have tried several brands and all of the brands I have sold had, at the time, some benefits. To make the list complete, I have sold :


RGB Laser System, Kvant, RTI, Laserworld, BeamZ, Aegis, Able, Kolo-Laser etc. I have found that Eighton is amongst the ones that offer the best quality vs price at the moment.
The higher quality brands I have mentioned here also offer great systems but their price levels are such that they are out of reach of many enthousiast laser users.
Some brand I have no respect for anymore and I have not even mentioned them here just because they were such bad quality.

Right now I feel good with the Eighton systems that we can offer through our cooperation with them.

As for building your own systems. You - out of all people - know that we've tried to go that route but resource planning and finances have been the reasons for not getting there.
We spoke about this many times in the past.

These days it's all " supply & demand" and our cooperation with Eighteen allows us to deliver good quality systems at a fair price.
Next to that, yes we offer service and warranty through our own Technical Department. So our customers do not need to ship their laser back to a manufacturer, no way...if there is any problem, we solve it for them. That's what service is about. We feel strongly about a good service and we think we've found a partner that thinks the same way.