Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: LaserWorld RG-Y projector modification

  1. #11
    Join Date
    May 2008
    Location
    Once it was called "Bel Paese" = ITALY
    Posts
    858

    Default

    Quote Originally Posted by LaserWolf View Post

    How would I integrate the module into the projector?
    Theoretically and practically also, you can do everything you like...

    Are you saying, I could buy a 4w blue module and simply add it where the red was
    Could be a choice, but too much blue unbalenced. 4W blue and 150mw green are not a good cyan color, absolutely not!
    Would I need any extra parts?
    It depend what kind of projector you would like to have: RG, BG, RG, RGY or RGB
    Just a thought... Could I replace the DPSS green with something better too?
    See above...
    I am open to ideas. The projector case is VERY strong and well built. However, as we all know, LaserWorld parts are not so good. I want to add as much power as possible..
    Sorry to disappoint you about LAserworld CS-RGy-800 case...... It's a bad bad case. Experienced personally.
    [/QUOTE]

    Anyway.... I written a PM to you
    Greetings!
    my webpage
    http://stevemilani.jimdo.com
    Skype ID: stevemilani957

    my RGB analogue projectors:
    3.9 W (640/532/445) 30kpps
    2.6 W (655/532/450) 30kpps
    2.5 W (638/532/450) 30kpps
    0.7 W (test unit)(635/532/473) 18kpps

  2. #12
    Join Date
    Nov 2012
    Location
    Oklahoma
    Posts
    8

    Default

    Absolom7691-

    Thank you for your help with that information. Just a FYI, I own 1-66watt RGB lasers. The only 'Jump' would be jumping down hehe. I own Kvant, ABLE, Laser Energy.. ECT.. Hell, I am using a 12w RGB as a foot stool as we speak. I have operated laser shows for over 7 years. HOWEVER, This is just a project for me to tinker with when I am not on the road with my big kid lasers... If ya feel me!

    Steve-

    Thank you! I ordered some dichros. I think what I plan to do is, add 6w of 445nm with a Kvant module. And then, i want to find a decent 2-3w DPSS Green to replace the 1-200mw green now.

    Hunter
    'The early bird gets the laser'


    www.RealBigLasers.com

  3. #13
    Join Date
    Jun 2011
    Location
    GuangZhou, China
    Posts
    273

    Default

    Hi Hunter,
    Glad to find you on PL!

    2-3W Green, I recommend you go to CNI.

    Regards
    Saifer
    L.A.S.E.R.
    Light Amplification by Stimulated Emission of Radiation

    Laser system: Pure Diode 3W & 6W RGB Laser.



    www.facebook.com/saifer.sy
    www.laser-viva.com

  4. #14
    Join Date
    Nov 2009
    Location
    Whanganui New Zealand
    Posts
    312

    Default

    Cni is choice. !

  5. #15
    Join Date
    May 2008
    Location
    Once it was called "Bel Paese" = ITALY
    Posts
    858

    Default

    Quote Originally Posted by daction View Post
    Cni is choice. !
    .... And Laserwave also!
    (CNI has huge PSU....)
    my webpage
    http://stevemilani.jimdo.com
    Skype ID: stevemilani957

    my RGB analogue projectors:
    3.9 W (640/532/445) 30kpps
    2.6 W (655/532/450) 30kpps
    2.5 W (638/532/450) 30kpps
    0.7 W (test unit)(635/532/473) 18kpps

  6. #16
    Join Date
    Jun 2011
    Location
    GuangZhou, China
    Posts
    273

    Default

    OEM ones is good choice if has better optical bed for cooling.
    L.A.S.E.R.
    Light Amplification by Stimulated Emission of Radiation

    Laser system: Pure Diode 3W & 6W RGB Laser.



    www.facebook.com/saifer.sy
    www.laser-viva.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •