Some .ild files not loading

[secdj]

Hi all,
New to this so i assume i am making a silly mistake,
I have downloaded what i can from various webpages, So far only 10 of the 30 or so that are loaded on the SD are working.
I have added the prg file but just copied a random code from a file in another prg folder in front of each ild name.

How am i to know the specs for each ild file to put on each ild name in the prg folder.

Any assistance greatly appreciated,

(Operating a equinox hydra)

[colouredmirrorball]

Some more information could help, such as providing a code example.
With these kind of laser systems, it's known that not all ILDA files work. You can use Laserboy to convert from one ilda file type to another.
There are several versions of the ilda file format: 0, 1, 2 and 4/5, depending on if they use a palette for colours or if they can display true 3D art. You'll need to figure out which version works for your system.

[secdj]

This is from the manual:

SD card mode
To activate this mode, press the “MODE” button to show “PROGRAM TABLE” on the LCD
display screen. Now press press the “ENTER” button. The unit will now show the selected
animation folder from the SD card.
To select an animation folder, press the “MODE” button to show “FOLDER SELECT” on the LCD
display screen. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to select
one of three demonstration folders pre-programmed onto the SD card;
1) ANIMA, 2) C, 3) BEAM
When the chosen folder has been selected, press the “ENTER” button and the unit will now revert
back to the SD card mode showing the chosen animation programme.
Caution: This system only supports the FAT32 file system, when using a new SD card please
format it as a FAT32 format file before use.
This system only supports short file names and folder names of up to 8 digit names and 3 digit
extensions, the file names and extension formatted by the letters, numbers and underscores and
so on.
Do not leave or include any other files on the SD card, it can support up to 100 folders, each can
store up 255 files.


The code i am using in prg file is :

Randomfile..ild£¬15£¬2