800-900mW RGB Stanwax Laser rebuild projector.
Sold.
I have decided to put this projector up for sale to help fund my plans to upgrade my other two projectors.
The case is the ChamTech DMX projector type. I got two of these cases back in 2008.
This projector went in for a rebuild from a green to RGB with Rob (Stanwax Laser) about 2 years ago.
As part of the rebuild the original steel base plate was dumped and a new 10mm Ally plate fitted. The top and bottom lids and the two end plates of the original case were retained.
The condition of the lids are very good still but the powder coating on the end plates has started flaking a bit.
The specs of the projector are :
Scanners - DT25 with large mirrors
Red - 170mW 637nm optnex Diode
Green - 200-250mW 532nm CNI
Blue - 400 - 500mW 445nm Diode.
The white from this projector is a pleasing ice/frost white.
Also fitted is the Stanwax ILDA safety board and the Stanwax solid state axis flip board that is operated by the two red buttons at the back. A Stanwax E-Stop will be needed and is not included but I can provide a bypass plug to get the projector running as a temporary measure.
official power reading is 520 mW
I am looking for a UK buyer willing to part with £600 or sensible very near offers.
Also collection from the up coming UK LEM would be preferable but it could be posted within the UK.
Feel free to ask question on this thread and PM's from potential buyers.
Carl
2 x Stanwax Laser 3W RGB's
Reply With Quote
